|
Hello all, I am having trouble figuring out why I am getting “Range check errors” when trying to model chilled ceiling panels. I have gone through the manual and mail archive but I still cannot understand where this error comes from… This is what
I have tried (the building has one zone): -
Chilled ceiling assigned to EXT_ROOF in position 1. In position 2, an 8cm thick concrete slab (I also tried assigning a chilled ceiling to ADJ_CEILING in position 1 but nothing came of it either) -
In the layer type manager, I left everything as default. -
In the chilled ceiling specification window, 15C and 750 kg/hr are the inlet temperature and flow rate of the fluid. -
Time base = 1 and time step = 0.1 h. Any help is welcome! Thank you, Ciarán |