[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TRNSYS-users] Question related to the inverter of type 194



Sotiris,
  The file contains the inverter efficiency as a function of the input power (in watts) and the input voltage (in volts). These values are typically published by manufacturers on the inverter specification sheets. If you do not have such a sheet then you can use the example data file and scale the input voltage and power to the range of input voltage and power that you need. Inverters tend to be quite efficient (around 95%) except when the input power is below about 5 to 10% of the rated input power at which point their efficiency drops quite a lot.
Kind regards,
 David


On 7/18/2013 02:28, Sotiris Papantoniou wrote:

Hello Trnsys users,

 

I am trying to model a pv-system with inverter. I have managed to model the photovoltaic modules using the plug-in, but now I have to model the inverter of the system. The characteristics of the inverter are partly set in the parameters of the type and the external file inserted by the user. Where can I find the information which are related to this file.

 

Thank you

 

Sotiris



_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@cae.wisc.edu
https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley@tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com