[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TRNSYS-users] Help Type48

Andrea,
  Without knowing a little more about the system you are trying to simulate, it is not really possible to give an answer. If you look in the 04-MathematicalReference manual at the descriptions for both Type47 and 48, you will note that their modes are meant to be set together. In other words both must be in mode 0 or both must be in mode 1. If you can send some additional information about what kind of system you are trying to model, I may be able to offer some more specific advice.
Kind regards,
 David


On 7/8/2013 10:32, Andrea Catalina Alvarado wrote:
Dear all

I not understand each mode of type 48, which need to connect to the battery type 47, and which are integrated battery.

Thank you very much.



_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@cae.wisc.edu
https://mailman.cae.wisc.edu/listinfo/trnsys-users


-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley@tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com