Dear all, I have some questions about the weather data user format (type 99) and about trnbuild (type 56). The purpose it’s to compare measured data in situ with simulation data. 1. I would like to use my weather data measured on site. I’m interested by solar radiation on tilted surface so I use type 99. The problem is, when I want to verify if the data like IBEAM_H, IDIFF_H, IGLOB_H given by my folder with those given in output of type 99 are the same, it’s not the case !! They are the same for IDIFF_H but not for the others. I don't really understand why ! It seems that Type 99 performs the calculation with the latitude, the longitude, solar time, etc. but if I want my own data, how can I do that? There is, between my data and outputs, an underestimation of approximately 10%. Furthermore, I want to use solar azimuth and zenith data provided by my folder and not by those calculated in type 99, there is a way for that? For others data like Tamb, wind speed and direction, Relative humidity there is no problem. 2. In Type 56, I want to simulate the behavior of a radiator. I know that type exist for that but I have not budget for this Can I used wallgain tab or maybe other gain in “gains” tab to simulate that? When I try, with similar power of a conventional radiator (1000-2000w) I have results with high temperature values. Do you have a solution for me? Many thanks Best regards, Mickael B |