[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[TRNSYS-users] AHU modelling

To: <TRNSYS-users@cae.wisc.edu>
Subject: [TRNSYS-users] AHU modelling
From: 64@enetec.it
Date: Wed, 19 Dec 2012 19:15:29 +0100
List-archive: <http://mailman.cae.wisc.edu/pipermail/trnsys-users>
List-help: <mailto:trnsys-users-request@cae.wisc.edu?subject=help>
List-id: "TRNSYS users mailing list at the Solar Energy Lab, UW-Madison" <trnsys-users.cae.wisc.edu>
List-post: <mailto:trnsys-users@cae.wisc.edu>
List-subscribe: <https://mailman.cae.wisc.edu/listinfo/trnsys-users>, <mailto:trnsys-users-request@cae.wisc.edu?subject=subscribe>
List-unsubscribe: <https://mailman.cae.wisc.edu/options/trnsys-users>, <mailto:trnsys-users-request@cae.wisc.edu?subject=unsubscribe>
Thread-index: Ac3eFNPIrk6ibUlNQSOlyjj2/cvQnw==

Dear trnsys users,

I am modeling an AHU using the foolowing types:

	Description	Types
	mixing chamber (fixed fresh/recirculated air rate)	11c
1^st coil	heating	670
2^nd coil	cooling/dehumidification	752g
3^rd coil	humidification	641
4^th coil	heating	752g

Setpoins are calculated separately with the calculator in order to drive dynamically each singular coil.

I would know if it is possible to model in a different way humidification, because I would command the coil using the humidification rate, rather than water temperature and a fixed water flow rate.

Thank you

Matteo

ing. Matteo Mariotti

Enetec S.r.l.

Ingegneria Energetica e Realizzazioni Impanti

ROMA Via del Maggiolino, 125 - 00155 Roma

telephone: 0039.(0)6.22754810 int.74

mobile: 0039.328.2161722

mailto: 64@enetec.it

Prev by Date: Re: [TRNSYS-users] Accessing subroutines embedded in other private Types
Next by Date: Re: [TRNSYS-users] Parabolic Dish
Previous by thread: [TRNSYS-users] Accessing subroutines embedded in other private Types
Next by thread: [TRNSYS-users] TRNSED application development
Index(es):
- Date
- Thread