Re: [TRNSYS-users] Hc when using the simple model

["Marion Hiller" <hiller@transsolar.com>]

HI Nicolas,

 

No, you have to enter the combined heat transfer coefficient for the simple mode. Unfotunately, the text daoen’t change automatically.

Please, have in mind that the radiation mode influences on the heat transfer method inside a zone.

 

Marion

 

 

 

Dipl.-Ing. Marion Hiller
TRANSSOLAR: KlimaEngineering - Technologien für energieeffizientes Bauen und Nutzerkomfort in Gebäude 
Munich - New York - Stuttgart + 49.711.67976.0

Transsolar Energietechnik GmbH, Curiestrasse 2, 70563 Stuttgart 
Amtsgericht Stuttgart - HRB 23347, Steuernummer 99073/00911, USt-IdNr.: DE152272639

Geschäftsführer: Dipl.Ing. Matthias Schuler, Dipl.Ing. Thomas Auer, Dipl.Phys. Stefan Holst, Prof. Dipl.-Ing. Bleicher 

 

 

---

  

Von: Nicolas Heijmans [mailto:nicolas.heijmans@bbri.be]
Gesendet: Freitag, 7. Dezember 2012 12:56
An: trnsys-users@cae.wisc.edu
Betreff: [TRNSYS-users] Hc when using the simple model

 

Hello,

 

I ask, just to be sure.

 

If I use the "simple model" (combined hc and hr), the value to give in the wall properties remains the convective heat transfer coefficient and the radiative heat transfer coefficient is added by TRNSYS ?

 

Thanks,

 

Nicolas