[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[TRNSYS-users] Convergence error for my project

To: "trnsys-users@cae.wisc.edu" <trnsys-users@cae.wisc.edu>
Subject: [TRNSYS-users] Convergence error for my project
From: Patrick Fabriek <P.H.Fabriek@tudelft.nl>
Date: Tue, 20 Nov 2012 16:44:15 +0000
Accept-language: en-US
List-archive: <http://mailman.cae.wisc.edu/pipermail/trnsys-users>
List-help: <mailto:trnsys-users-request@cae.wisc.edu?subject=help>
List-id: "TRNSYS users mailing list at the Solar Energy Lab, UW-Madison" <trnsys-users.cae.wisc.edu>
List-post: <mailto:trnsys-users@cae.wisc.edu>
List-subscribe: <https://mailman.cae.wisc.edu/listinfo/trnsys-users>, <mailto:trnsys-users-request@cae.wisc.edu?subject=subscribe>
List-unsubscribe: <https://mailman.cae.wisc.edu/options/trnsys-users>, <mailto:trnsys-users-request@cae.wisc.edu?subject=unsubscribe>
Thread-index: Ac3HPf7WFn16p7X5SruAa46UeoGmYw==
Thread-topic: Convergence error for my project

Dear TRNSYS users,

I developed a house with a heat pump connected to an active layer (floor heating in the house) and a domestic storage tank which the heat pump heats up every 24 till 60 degrees.

The model works, but there are convergence errors every now and then. It has to do with how I switch off and on the pumps. As TRNSYS tells me that the mass flow balance is incorrect. To me it looks like some control issue.

My model is in the attachments, can anyone be so kind and give me some pointers how I can get rid of these errors.

Kind regards,

Patrick Fabriek

Attachment: ModelF.zip
Description: ModelF.zip

Prev by Date: [TRNSYS-users] accelerate statement issue in TRNSYS17?
Next by Date: [TRNSYS-users] Carbon dioxide (R744) heat pump data
Previous by thread: [TRNSYS-users] accelerate statement issue in TRNSYS17?
Next by thread: [TRNSYS-users] Carbon dioxide (R744) heat pump data
Index(es):
- Date
- Thread