[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[TRNSYS-users] Type954



Dear Group,
I have the following situation. I have an input data file with the QCOOL from a server room which was served by a split unit. Now I am trying to find the electrical consumption of the split unit, both indoor and outdoor.
I was hoping to modulate the indoor fan flow until the delivered cooling to the room equals my QCOOL. I set parameter10 "Total air flow rate" (the air flow over the indoor unit coil) to -1, so that I can pass it the flow as described. I have an itterative controller that watches the total cooling rate of the type, compares it to my QCOOL data, and tries to set the input4 "Return air flow rate" (the flow rate over the inside unit coil) so that the cooling powers match. Various flow rates seem to have no effect. Any ideas?
Regards,
Jean.