[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [TRNSYS-users] Heat Pump mass flow rates (e.g. Type 401)
Michael,
I would recommend that you look online at manufacturer's sites for
similarly sized heat pumps. Trane and Carrier both have significant
amounts of performance data in the product literature parts of their
sites. You can probably get a good estimate of the flow rates on both
the condenser and evaporator sizes from them.
Best,
david
On 10/18/2012 03:53, Michael Diekerhof wrote:
Dear all,
I´m working with the heat pump non-standard type 401 and try to
display an air-source heat pump.
I dont have typical values for the Input 2 (evaporator mass flowrate)
and Input 4 (condenser mass flowrate).
The only real connection I´m using is the dry bulb temp, coming from
type 15, as the evaporator inlet temperature. For the massflowrates I
would like to assume constant values.
How can I adjust an outlet condenser temperature of e.g. 55°C. Just
about the massflowrates ?!
Does anyone have experience with heat pump mass flow rates?! I guess
it´s not necessary to have expieriences with Type 401.
I´m thankful for any advices.
Best,
Michael
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@cae.wisc.edu
https://mailman.cae.wisc.edu/listinfo/trnsys-users
--
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI 53703 USA
P:+1.608.274.2577
F:+1.608.278.1475
d.bradley@tess-inc.com
http://www.tess-inc.com
http://www.trnsys.com