Hello everyone, I have a couple questions regarding batteries
in TRNSYS 17. 1.
I have been trying to use a
battery (type 47c) combined with a regulator/inverter (type 48b). The input and
load powers are read from external files. When I increase the number of cells
in parallel or in series while keeping the same cell energy capacity (in Ah),
the amount of energy storable in the battery (energy stored in the battery when
it reaches 100% SOC) does not change, and is way above the rated energy
capacity (that I consider equal to C = Cell Energy Capacity x Cells in parallel
x Cells in series x Voltage, expressed in Ah). However, when I change the values of
the max charge and discharge currents, it changes the amount energy storable in
the battery, which I don’t understand either. Moreover, if the battery is fully
charged and starts discharging, the fractional state of charge of the battery
increases above 1, instead of decreasing as it should be the case. Could someone give me some insights
on what I am missing here? 2.
I was also wondering if a
Li-ion module had been developed for TRNSYS. I have seen previous messages
saying that none existed, is it still the case? Thank you in advance for your help. Best regards, Sylvain Hippolyte GDF SUEZ Mail Disclaimer: http://www.gdfsuez.com/disclaimer/disclaimer-fr.html |