Re: [TRNSYS-users] Problem with Programming in TRNSYS and CVF 6b

[David BRADLEY <d.bradley@tess-inc.com>]

Dear Konstantinos,
  This is odd; the calling structure of TRNSYS has not changed. At the beginning of every timestep, INFO(7) is set to 0. If there are iterations within the timestep, INFO(7) carries the iteration number. It is then reset to 0 at the start of the next time step.

  If you are using TRNSYS 17, there are a number of access functions that are recommended to replace the direct calls to look at the value of elements in the INFO() array however if you stick with the Trnsys16 coding standard, there is no reason why you can't look directly at the value of the INFO() array elements.

  The first thing I would try to do is to recompile everything (ideally putting your component directly into the TRNDll if possible since that way you will only have one DLL to worry about). Then debug; put a breakpoint into your code on an

IF (INFO(7) .eq. 0) THEN

line. Run your simulation and can you please tell me what value INFO(7) has after it is set to -1? The only thing I can think of is that the simulation is getting an error and stopping in some other piece of code before it ever gets to the first time step.
Best,
 David
 

On 7/14/2012 09:31, ??d???p?????? ???sta?t???? wrote:

Dear TRNSYS Users

 

I am having a problem on programming a new module in trnsys.  Year Ago I had create a module and it was working in TRNSYS.

 

I am trying now to use it again but I doesn’t. As I have found until now the INFO(7) = -2 works ok, the INFO(7) = -1 Works OK but the INFO(7)=0 never happens so the code cannot initialize

 

Does anyone have any solution to this problem  ?

 

 

 

Thank you in advanced

 

K. Ordoumpozanis

 

 

_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@cae.wisc.edu
https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley@tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com