|
Ewen, You may check the manual 05-MultizoneBuilding.pdf
: 5.2.4.10.
Coupling between airnodes of same zone Since Version 17, a thermal zone may consist
of more than one airnode. In general, these airnodes do not have a
common wall. For defining a coupling between these
airnode within the same zone, this regime option can be used. Each airnode may get up to
two coupling airflows from “adjacent” airnodes. (Note: “Upper”
and “lower” are just names which don’t correspond to the actual
location). First, the coupling has to
be activated, than the airnode from which the air flow is coming has to be
selected. Finally, the coupling
airflow has to be defined as a constant, schedule or input. If you have more than one
arinode in one zone an additional button in the regime called “coupling”
is visible In the airnode window. You need activate this regime
coupling in both airnodes. Dipl.-Ing.
Geschäftsführer:
Dipl.Ing. Matthias Schuler, Dipl.Ing. Thomas Auer, Dipl.Phys. Stefan Holst,
Prof. Dipl.-Ing. Bleicher Von: ewen raballand
[mailto:ewen.raballand@gmail.com] Dear
users, |