|
Juan Francisco, When you draw your building in Trnsys3D, you will need to perform either an automatic or a manual surface matching so that the wall that separates the two zones is listed as ADJACENT in both. Once you import your *.idf into TRNBuild, you should see the ADJACENT wall listed in both zones. Go to the wall typemanager and select the ADJACENT wall type (note, you may want to make a copy of this wall and give it a new name in case you have more than one type of adjacent wall in your building). You can now change the layers to be whatever you like. Note that at the top of the layer list there is text that says "front/inside." This means that the first layer in the list is denoted as the "front" of the wall. Lastly, go to the zone that contains the "front" of the wall, select the ADJACENT wall in that zone and make sure that the radio button below says "front." If it says "back," simply change it to "front." Best, David On 5/16/2012 02:50, JUAN FRANCISCO BELMONTE TOLEDO wrote:
-- *************************** David BRADLEY Principal Thermal Energy Systems Specialists, LLC 22 North Carroll Street - suite 370 Madison, WI 53703 USA P:+1.608.274.2577 F:+1.608.278.1475 d.bradley@tess-inc.com http://www.tess-inc.com http://www.trnsys.com |