Dear TRNSYS-users,I am trying to simulate a cooled ceiling. However, as soon as I start the simulation (F8) an alert appears as can be seen in the attachment. Further, I cannot edit the Building (Type 56) anymore and I have to restart from the last backup.
I have attached the .lst file as well. Thank you very much for your suggestions! Kind regards Michael Mischkot
Attachment:
Screenshot_1.JPG
Description: JPEG image
TRNSYS - the TRaNsient SYstem Simulation program
The Solar Energy Lab at the University of Wisconsin - Madison, USA
Le Centre Scientifique et Technique du Batiment, Sophia Antipolis, France
Transsolar Energietechnik GmBH, Stuttgart, Germany
Thermal Energy System Specialists, Madison Wisconsin, USA
Release 16.01.0003
Listing file for: "E:\DIPLOMARBEIT 2012-03-25 DELETE THE OTHER\TRNSYS SIMULATIONEN\2012-04-27\BuildingProject5.dck"
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : The TRNSYS Executable (TRNExe.exe) and main DLL (TRNDll.dll) are located in "C:\Programme\Trnsys16_1\Exe"
*** Pre-Processing the TRNSYS EQUATIONs and CONSTANTs to check for fatal errors.
*** Pre-Processing of EQUATIONs and CONSTANTs completed with no fatal errors found.
*** Evaluating the EQUATIONs and CONSTANTs to determine their initial values.
*** Finished evaluating the EQUATIONs and CONSTANTs and ready to begin processing the remainder of the TRNSYS input file.
VERSION 16
*******************************************************************************
*** TRNSYS input file (deck) generated by TrnsysStudio
*** on Montag, April 30, 2012 at 20:51
*** from TrnsysStudio project: E:\DIPLOMARBEIT 2012-03-25 DELETE THE OTHER\TRNSYS SIMULATIONEN\2012-04-27\BuildingProject5.tpf
***
*** If you edit this file, use the File/Import TRNSYS Input File function in
*** TrnsysStudio to update the project.
***
*** If you have problems, questions or suggestions please contact your local
*** TRNSYS distributor or mailto:software@cstb.fr
***
*******************************************************************************
*******************************************************************************
*** Units
*******************************************************************************
*******************************************************************************
*** Control cards
*******************************************************************************
* START, STOP and STEP
CONSTANTS 3
START=0
STOP=8760
STEP=1
* User defined CONSTANTS
! Start time End time Time step
SIMULATION 0.0000000000000000E+00 8.7600000000000000E+03 1.0000000000000000E+00
! Integration Convergence
TOLERANCES 1.0000000000000002E-03 1.0000000000000002E-03
! Max iterations Max warnings Trace limit
LIMITS 30 30 31
! TRNSYS numerical integration solver method
DFQ 1
! TRNSYS output file width, number of characters
WIDTH 72
! NOLIST statement
LIST
! MAP statement
! Solver statement Minimum relaxation factor Maximum relaxation factor
SOLVER 0
1.000000000000000
1.000000000000000
! Nan DEBUG statement
NAN_CHECK 0
! Overwrite DEBUG statement
OVERWRITE_CHECK 0
! disable time report
TIME_REPORT 0
! EQUATION SOLVER statement
EQUATION SOLVING METHOD 0
* EQUATIONS "Turn"
*
EQUATIONS 5
TURN = 0
AA_N = 180 + TURN
AA_S = TURN
AA_E = -90 + TURN
AA_W = 90 + TURN
*$UNIT_NAME Turn
*$LAYER Main
*$POSITION 72 121
*------------------------------------------------------------------------------
* EQUATIONS "Radiation"
*
EQUATIONS 24
AISZ = [13,10]
AISA = [13,11]
IT_H = Max([13,12],0)
IB_H = Max([13,13],0)
ID_H = [13,14]
AI_H = [13,16]
IT_N = [13,18]
AI_N = [13,22]
IB_N = [13,19] * LT(AI_N,90)
IT_S = [13,24]
IB_S = [13,25]
AI_S = [13,28]
IT_E = [13,30]
IB_E = [13,31]
AI_E = [13,34]
IT_W = [13,36]
IB_W = [13,37]
AI_W = [13,40]
IT_NI = [13,42]
IB_NI = [13,43]
AI_NI = [13,46]
IT_SI = [13,48]
IB_SI = [13,49]
AI_SI = [13,52]
*$UNIT_NAME Radiation
*$LAYER Main
*$POSITION 194 72
*------------------------------------------------------------------------------
* Model "Psychrometrics" (Type 33)
*
UNIT 331 TYPE 33
*$UNIT_NAME Psychrometrics
*$MODEL .\Physical Phenomena\Thermodynamic Properties\Psychrometrics\Dry Bulb and Relative Humidity Known\Type33e.tmf
*$POSITION 200 656
*$LAYER Main #
PARAMETERS 3
! 1 Psychrometrics mode
! 2 Wet bulb mode
! 3 Error mode
2.0000000000000000E+00 1.0000000000000000E+00 1.0000000000000000E+00
INPUTS 3
! Type109-User:Ambient temperature ->Dry bulb temp.
! Type109-User:relative humidity ->Percent relative humidity
! [unconnected] Pressure
13,1 13,2 CONST
*** INITIAL INPUT VALUES
2.0000000000000000E+01 5.0000000000000000E+01 1.0000000000000000E+00
*------------------------------------------------------------------------------
* Model "Sky temp" (Type 69)
*
UNIT 69 TYPE 69 temp
*$UNIT_NAME Sky temp
*$MODEL .\Physical Phenomena\Sky Temperature\calculate cloudiness factor\Type69b.tmf
*$POSITION 359 627
*$LAYER Main # #
PARAMETERS 2
! 1 mode for cloudiness factor
! 2 height over sea level
0.0000000000000000E+00 0.0000000000000000E+00
INPUTS 4
! Psychrometrics:Dry bulb temperature ->Ambient temperature
! Psychrometrics:Dew point temperature. ->Dew point temperature at ambient conditions
! Type109-User:beam radiation on horitonzal ->Beam radiation on the horizontal
! Type109-User:sky diffuse radiation on horizontal ->Diffuse radiation on the horizontal
331,7 331,8 13,13 13,14
*** INITIAL INPUT VALUES
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
*------------------------------------------------------------------------------
* Model "Building" (Type 56)
*
UNIT 56 TYPE 56
*$UNIT_NAME Building
*$MODEL .\Loads and Structures\Multi-Zone Building\With Standard Output Files\Type56a.tmf
*$POSITION 795 776
*$LAYER Main # #
*$#
PARAMETERS 6
! 1 Logical unit for building description file (.bui)
! 2 Star network calculation switch
! 3 Weighting factor for operative temperature
! 4 Logical unit for monthly summary
! 5 Logical unit for hourly temperatures
! 6 Logical unit for hourly loads
3.1000000000000000E+01 1.0000000000000000E+00 5.0000000000000000E-01 3.2000000000000000E+01 3.3000000000000000E+01
3.4000000000000000E+01
INPUTS 61
! Psychrometrics:Dry bulb temperature -> 1- TAMB
! Psychrometrics:Percent relative humidity -> 2- RELHUMAMB
! Sky temp:Fictive sky temperature -> 3- TSKY
! Radiation:IT_N -> 4- IT_NORTH
! Radiation:IT_S -> 5- IT_SOUTH
! Radiation:IT_E -> 6- IT_EAST
! Radiation:IT_W -> 7- IT_WEST
! Radiation:IT_H -> 8- IT_HORIZONTAL
! Fixed Shading:IT_NA_SHD -> 9- IT_SHADNORTH
! Radiation:IT_NI -> 10- IT_NORTH_I
! Radiation:IT_SI -> 11- IT_SOUTH_I
! Fixed Shading:IT_NA_SHD -> 12- IT_SHADNORTH_A
! Fixed Shading:IT_NB_SHD -> 13- IT_SHADNORTH_B
! Fixed Shading:IT_S_SHD -> 14- IT_SHADSOUTH
! Fixed Shading:IT_EtoN_SHD -> 15- IT_SHADEAST_TON
! Fixed Shading:IT_EtoS_SHD -> 16- IT_SHADEAST_TOS
! Fixed Shading:IT_WtoN_SHD -> 17- IT_SHADWEST_TON
! Fixed Shading:IT_WtoS_SHD -> 18- IT_SHADWEST_TOS
! Radiation:IB_N -> 19- IB_NORTH
! Radiation:IB_S -> 20- IB_SOUTH
! Radiation:IB_E -> 21- IB_EAST
! Radiation:IB_W -> 22- IB_WEST
! Radiation:IB_H -> 23- IB_HORIZONTAL
! Fixed Shading:IB_NA_SHD -> 24- IB_SHADNORTH
! Radiation:IB_NI -> 25- IB_NORTH_I
! Radiation:IB_SI -> 26- IB_SOUTH_I
! Fixed Shading:IB_NA_SHD -> 27- IB_SHADNORTH_A
! Fixed Shading:IB_NB_SHD -> 28- IB_SHADNORTH_B
! Fixed Shading:IB_S_SHD -> 29- IB_SHADSOUTH
! Fixed Shading:IB_EtoN_SHD -> 30- IB_SHADEAST_TON
! Fixed Shading:IB_EtoS_SHD -> 31- IB_SHADEAST_TOS
! Fixed Shading:IB_WtoN_SHD -> 32- IB_SHADWEST_TON
! Fixed Shading:IB_WtoS_SHD -> 33- IB_SHADWEST_TOS
! Radiation:AI_N -> 34- AI_NORTH
! Radiation:AI_S -> 35- AI_SOUTH
! Radiation:AI_E -> 36- AI_EAST
! Radiation:AI_W -> 37- AI_WEST
! Radiation:AI_H -> 38- AI_HORIZONTAL
! Fixed Shading:AI_NA_SHD -> 39- AI_SHADNORTH
! Radiation:AI_NI -> 40- AI_NORTH_I
! Radiation:AI_SI -> 41- AI_SOUTH_I
! Fixed Shading:AI_NA_SHD -> 42- AI_SHADNORTH_A
! Fixed Shading:AI_NB_SHD -> 43- AI_SHADNORTH_B
! Fixed Shading:AI_S_SHD -> 44- AI_SHADSOUTH
! Fixed Shading:AI_EtoN_SHD -> 45- AI_SHADEAST_TON
! Fixed Shading:AI_EtoS_SHD -> 46- AI_SHADEAST_TOS
! Fixed Shading:AI_WtoN_SHD -> 47- AI_SHADWEST_TON
! Fixed Shading:AI_WtoS_SHD -> 48- AI_SHADWEST_TOS
! [unconnected] 49- CNAT_1
! [unconnected] 50- CNAT_2
! [unconnected] 51- T_COOL_ON
! [unconnected] 52- S_NORTH
! [unconnected] 53- S_SOUTH
! [unconnected] 54- S_EAST
! [unconnected] 55- S_WEST
! [unconnected] 56- BRIGHT
! [unconnected] 57- T_AIR_IN
! [unconnected] 58- M_AIR_IN
! [unconnected] 59- RH_AIR_IN
! [unconnected] 60- T_H2O_IN
! [unconnected] 61- M_H2O_IN
331,7 331,6 69,1 IT_N IT_S
IT_E IT_W IT_H IT_NA_SHD IT_NI
IT_SI IT_NA_SHD IT_NB_SHD IT_S_SHD IT_ETON_SHD
IT_ETOS_SHD IT_WTON_SHD IT_WTOS_SHD IB_N IB_S
IB_E IB_W IB_H IB_NA_SHD IB_NI
IB_SI IB_NA_SHD IB_NB_SHD IB_S_SHD IB_ETON_SHD
IB_ETOS_SHD IB_WTON_SHD IB_WTOS_SHD AI_N AI_S
AI_E AI_W AI_H AI_NA_SHD AI_NI
AI_SI AI_NA_SHD AI_NB_SHD AI_S_SHD AI_ETON_SHD
AI_ETOS_SHD AI_WTON_SHD AI_WTOS_SHD CONST CONST
CONST CONST CONST CONST CONST
CONST CONST CONST CONST CONST
CONST
*** INITIAL INPUT VALUES
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00
*** External files
ASSIGN BuildingProject5.bui 31
*|? Building description file (*.bui) |1000
ASSIGN T56_std-Output.sum 32
*|? Monthly Summary File |1000
ASSIGN T56_std-temp.prn 33
*|? Hourly Temperatures |1000
ASSIGN T56_std-q.prn 34
*|? Hourly Loads |1000
*------------------------------------------------------------------------------
* Model "Output" (Type 65)
*
UNIT 25 TYPE 65
*$UNIT_NAME Output
*$MODEL .\Output\Online Plotter\Online Plotter Without File\Type65d.tmf
*$POSITION 967 773
*$LAYER Main # #
PARAMETERS 12
! 1 Nb. of left-axis variables
! 2 Nb. of right-axis variables
! 3 Left axis minimum
! 4 Left axis maximum
! 5 Right axis minimum
! 6 Right axis maximum
! 7 Number of plots per simulation
! 8 X-axis gridpoints
! 9 Shut off Online w/o removing
! 10 Logical unit for output file
! 11 Output file units
! 12 Output file delimiter
5.0000000000000000E+00 1.0000000000000000E+00 0.0000000000000000E+00 5.0000000000000000E+01 0.0000000000000000E+00
2.5000000000000000E+04 1.0000000000000000E+00 1.2000000000000000E+01 0.0000000000000000E+00 -1.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00
INPUTS 6
! Building: 1- TAIR_ZONE_A1 ->Left axis variable-1
! Building: 2- TAIR_ZONE_B1 ->Left axis variable-2
! [unconnected] Left axis variable-3
! [unconnected] Left axis variable-4
! Type109-User:Ambient temperature ->Left axis variable-5
! Building: 4- QCOOL_ZONE_B1 ->Right axis variable
56,1 56,2 CONST CONST 13,1
56,4
*** INITIAL INPUT VALUES
Zone_A Zone_B Zone_C Zone_ RoofTop T_amb
Cooling
LABELS 3
Temperatures [deg C]
Cooling load
Temperatures/Cooling Load
*------------------------------------------------------------------------------
* Model "Type55" (Type 55)
*
UNIT 14 TYPE 55
*$UNIT_NAME Type55
*$MODEL .\Utility\Integrators\Periodic Integrator\Type55.tmf
*$POSITION 877 605
*$LAYER Main #
PARAMETERS 7
! 1 Integrate or sum input
! 2 Relative starting hour for input
! 3 Duration for input
! 4 Cycle repeat time for input
! 5 Reset time for input
! 6 Absolute starting hour for input
! 7 Absolute stopping hour for input
1.0000000000000000E+00 1.0000000000000000E+00 1.0000000000000000E+00 1.0000000000000000E+00 -1.0000000000000000E+00
0.0000000000000000E+00 8.7600000000000000E+03
INPUTS 1
! Building: 4- QCOOL_ZONE_B1 ->Input
56,4
*** INITIAL INPUT VALUES
0.0000000000000000E+00
*------------------------------------------------------------------------------
* Model "Type109-User" (Type 109)
*
UNIT 13 TYPE 109
*$UNIT_NAME Type109-User
*$MODEL .\Weather Data Reading and Processing\User Format\Type109-User.tmf
*$POSITION 67 510
*$LAYER Weather - Data Files #
PARAMETERS 4
! 1 Data Reader Mode
! 2 Logical unit
! 3 Sky model for diffuse radiation
! 4 Tracking mode
1.0000000000000000E+00 3.5000000000000000E+01 4.0000000000000000E+00 1.0000000000000000E+00
INPUTS 15
! [unconnected] Ground reflectance
! [unconnected] Slope of surface-1
! [unconnected] Azimuth of surface-1
! [unconnected] Slope of surface-2
! [unconnected] Azimuth of surface-2
! [unconnected] Slope of surface-3
! [unconnected] Azimuth of surface-3
! [unconnected] Slope of surface-4
! [unconnected] Azimuth of surface-4
! [unconnected] Slope of surface-5
! [unconnected] Azimuth of surface-5
! [unconnected] Slope of surface-6
! [unconnected] Azimuth of surface-6
! [unconnected] Slope of surface-7
! [unconnected] Azimuth of surface-7
CONST CONST CONST CONST CONST
CONST CONST CONST CONST CONST
CONST CONST CONST CONST CONST D
*** INITIAL INPUT VALUES
2.0000000000000001E-01 9.0000000000000000E+01 1.8000000000000000E+02 9.0000000000000000E+01 0.0000000000000000E+00
9.0000000000000000E+01 -9.0000000000000000E+01 9.0000000000000000E+01 9.0000000000000000E+01 3.0000000000000000E+01
1.8000000000000000E+02 1.2000000000000000E+01 0.0000000000000000E+00 1.6000000000000000E+01 0.0000000000000000E+00
*** External files
ASSIGN Wauhour_mod.dat 35
*|? Weather data file |1000
*------------------------------------------------------------------------------
* Model "Type65a-3" (Type 65)
*
UNIT 21 TYPE 65
*$UNIT_NAME Type65a-3
*$MODEL .\Output\Online Plotter\Online Plotter With File\TRNSYS-Supplied Units\Type65a.tmf
*$POSITION 997 605
*$LAYER Main #
PARAMETERS 12
! 1 Nb. of left-axis variables
! 2 Nb. of right-axis variables
! 3 Left axis minimum
! 4 Left axis maximum
! 5 Right axis minimum
! 6 Right axis maximum
! 7 Number of plots per simulation
! 8 X-axis gridpoints
! 9 Shut off Online w/o removing
! 10 Logical Unit for output file
! 11 Output file units
! 12 Output file delimiter
2.0000000000000000E+00 2.0000000000000000E+00 0.0000000000000000E+00 8.0000000000000000E+06 0.0000000000000000E+00
1.0000000000000000E+03 1.0000000000000000E+00 1.2000000000000000E+01 0.0000000000000000E+00 4.0000000000000000E+01
2.0000000000000000E+00 0.0000000000000000E+00
INPUTS 4
! Type55:Integral of input ->Left axis variable-1
! [unconnected] Left axis variable-2
! [unconnected] Right axis variable-1
! [unconnected] Right axis variable-2
14,1 CONST CONST CONST
*** INITIAL INPUT VALUES
Integral label label label
LABELS 3
Graph 3
*** External files
ASSIGN E:\DIPLOMARBEIT 2012-03-25 DELETE THE OTHER\TRNSYS SIMULATIONEN\2012-04-27\BuildingProject5.plt 40
*|? What file should the online print to? |1000
*------------------------------------------------------------------------------
* Model "Type34-N_ZoneA" (Type 34)
*
UNIT 22 TYPE 34
*$UNIT_NAME Type34-N_ZoneA
*$MODEL .\Loads and Structures\Overhang and Wingwall Shading\Type34.tmf
*$POSITION 397 125
*$LAYER Main #
PARAMETERS 16
! 1 Upstream component mode
! 2 Receiver height
! 3 Receiver width
! 4 Overhang projection
! 5 Overhang gap
! 6 Overhang left extension
! 7 Overhang right extension
! 8 Left wingwall projection
! 9 Left wingwall gap
! 10 Left wingwall top extension
! 11 Left wingwall bottom extension
! 12 Right wingwall projection
! 13 Right wingwall gap
! 14 Right wingwall top extension
! 15 Right wingwall bottom extension
! 16 Receiver azimuth
0.0000000000000000E+00 5.0000000000000000E+01 5.0000000000000000E+00 5.0000000000000000E+00 5.0000000000000000E+00
5.0000000000000000E+00 5.0000000000000000E+00 5.0000000000000000E+00 5.0000000000000000E+00 5.0000000000000000E+00
5.0000000000000000E-01 5.0000000000000000E+00 5.0000000000000000E+00 5.0000000000000000E+00 5.0000000000000000E-01
1.8000000000000000E+02
INPUTS 7
! Radiation:AISZ ->Solar zenith angle
! Radiation:AISA ->Solar azimuth angle
! Radiation:IT_H ->Total horizontal radiation
! Radiation:ID_H ->Horizontal diffuse radiation
! Radiation:IB_N ->Beam radiation on surface
! [unconnected] Ground reflectance
! Radiation:AI_N ->Incidence angle of direct radiation
AISZ AISA IT_H ID_H IB_N
CONST AI_N
*** INITIAL INPUT VALUES
4.5000000000000000E+01 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
2.0000000000000001E-01 0.0000000000000000E+00
*------------------------------------------------------------------------------
* EQUATIONS "Fixed Shading"
*
EQUATIONS 24
IT_NA_SHD = [22,1]
IB_NA_SHD = [22,2]
AI_NA_SHD = AI_N
IT_H_SHD = IT_H
IB_H_SHD = IB_H
AI_H_SHD = AI_H
IT_NB_SHD = [15,1]
IB_NB_SHD = [15,2]
AI_NB_SHD = AI_N
IT_S_SHD = [16,1]
IB_S_SHD = [16,2]
AI_S_SHD = AI_S
IT_WtoN_SHD = [19,1]
IB_WtoN_SHD = [19,2]
AI_WtoN_SHD = AI_W
IT_WtoS_SHD = [20,1]
IB_WtoS_SHD = [20,2]
AI_WtoS_SHD = AI_W
IT_EtoN_SHD = [17,1]
IB_EtoN_SHD = [17,2]
AI_EtoN_SHD = AI_E
IT_EtoS_SHD = [18,1]
IB_EtoS_SHD = [18,2]
AI_EtoS_SHD = AI_E
*$UNIT_NAME Fixed Shading
*$LAYER Main
*$POSITION 675 125
*------------------------------------------------------------------------------
* Model "Type34-N_ZoneB" (Type 34)
*
UNIT 15 TYPE 34
*$UNIT_NAME Type34-N_ZoneB
*$MODEL .\Loads and Structures\Overhang and Wingwall Shading\Type34.tmf
*$POSITION 401 178
*$LAYER Main #
PARAMETERS 16
! 1 Upstream component mode
! 2 Receiver height
! 3 Receiver width
! 4 Overhang projection
! 5 Overhang gap
! 6 Overhang left extension
! 7 Overhang right extension
! 8 Left wingwall projection
! 9 Left wingwall gap
! 10 Left wingwall top extension
! 11 Left wingwall bottom extension
! 12 Right wingwall projection
! 13 Right wingwall gap
! 14 Right wingwall top extension
! 15 Right wingwall bottom extension
! 16 Receiver azimuth
0.0000000000000000E+00 1.5000000000000000E+00 1.0000000000000000E+00 1.0000000000000000E+00 5.0000000000000000E-01
5.0000000000000000E-01 5.0000000000000000E-01 1.0000000000000000E+00 5.0000000000000000E-01 5.0000000000000000E-01
5.0000000000000000E-01 1.0000000000000000E+00 5.0000000000000000E-01 5.0000000000000000E-01 5.0000000000000000E-01
1.8000000000000000E+02
INPUTS 7
! Radiation:AISZ ->Solar zenith angle
! Radiation:AISA ->Solar azimuth angle
! Radiation:IT_H ->Total horizontal radiation
! Radiation:ID_H ->Horizontal diffuse radiation
! Radiation:IB_N ->Beam radiation on surface
! [unconnected] Ground reflectance
! Radiation:AI_N ->Incidence angle of direct radiation
AISZ AISA IT_H ID_H IB_N
CONST AI_N
*** INITIAL INPUT VALUES
4.5000000000000000E+01 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
2.0000000000000001E-01 0.0000000000000000E+00
*------------------------------------------------------------------------------
* Model "Type34-S" (Type 34)
*
UNIT 16 TYPE 34
*$UNIT_NAME Type34-S
*$MODEL .\Loads and Structures\Overhang and Wingwall Shading\Type34.tmf
*$POSITION 401 232
*$LAYER Main #
PARAMETERS 16
! 1 Upstream component mode
! 2 Receiver height
! 3 Receiver width
! 4 Overhang projection
! 5 Overhang gap
! 6 Overhang left extension
! 7 Overhang right extension
! 8 Left wingwall projection
! 9 Left wingwall gap
! 10 Left wingwall top extension
! 11 Left wingwall bottom extension
! 12 Right wingwall projection
! 13 Right wingwall gap
! 14 Right wingwall top extension
! 15 Right wingwall bottom extension
! 16 Receiver azimuth
0.0000000000000000E+00 1.5000000000000000E+00 1.0000000000000000E+00 1.0000000000000000E+00 5.0000000000000000E-01
5.0000000000000000E-01 5.0000000000000000E-01 1.0000000000000000E+00 5.0000000000000000E-01 5.0000000000000000E-01
5.0000000000000000E-01 1.0000000000000000E+00 5.0000000000000000E-01 5.0000000000000000E-01 5.0000000000000000E-01
0.0000000000000000E+00
INPUTS 7
! Radiation:AISZ ->Solar zenith angle
! Radiation:AISA ->Solar azimuth angle
! Radiation:IT_H ->Total horizontal radiation
! Radiation:ID_H ->Horizontal diffuse radiation
! Radiation:IB_S ->Beam radiation on surface
! [unconnected] Ground reflectance
! Radiation:AI_S ->Incidence angle of direct radiation
AISZ AISA IT_H ID_H IB_S
CONST AI_S
*** INITIAL INPUT VALUES
4.5000000000000000E+01 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
2.0000000000000001E-01 0.0000000000000000E+00
*------------------------------------------------------------------------------
* Model "Type34-E_to_N" (Type 34)
*
UNIT 17 TYPE 34
*$UNIT_NAME Type34-E_to_N
*$MODEL .\Loads and Structures\Overhang and Wingwall Shading\Type34.tmf
*$POSITION 401 285
*$LAYER Main #
PARAMETERS 16
! 1 Upstream component mode
! 2 Receiver height
! 3 Receiver width
! 4 Overhang projection
! 5 Overhang gap
! 6 Overhang left extension
! 7 Overhang right extension
! 8 Left wingwall projection
! 9 Left wingwall gap
! 10 Left wingwall top extension
! 11 Left wingwall bottom extension
! 12 Right wingwall projection
! 13 Right wingwall gap
! 14 Right wingwall top extension
! 15 Right wingwall bottom extension
! 16 Receiver azimuth
0.0000000000000000E+00 1.5000000000000000E+00 1.0000000000000000E+00 1.0000000000000000E+00 5.0000000000000000E-01
5.0000000000000000E-01 5.0000000000000000E-01 1.0000000000000000E+00 5.0000000000000000E-01 5.0000000000000000E-01
5.0000000000000000E-01 1.0000000000000000E+00 5.0000000000000000E-01 5.0000000000000000E-01 5.0000000000000000E-01
-9.0000000000000000E+01
INPUTS 7
! Radiation:AISZ ->Solar zenith angle
! Radiation:AISA ->Solar azimuth angle
! Radiation:IT_H ->Total horizontal radiation
! Radiation:ID_H ->Horizontal diffuse radiation
! Radiation:IB_E ->Beam radiation on surface
! [unconnected] Ground reflectance
! Radiation:AI_E ->Incidence angle of direct radiation
AISZ AISA IT_H ID_H IB_E
CONST AI_E
*** INITIAL INPUT VALUES
4.5000000000000000E+01 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
2.0000000000000001E-01 0.0000000000000000E+00
*------------------------------------------------------------------------------
* Model "Type34-E_to_S" (Type 34)
*
UNIT 18 TYPE 34
*$UNIT_NAME Type34-E_to_S
*$MODEL .\Loads and Structures\Overhang and Wingwall Shading\Type34.tmf
*$POSITION 402 349
*$LAYER Main #
PARAMETERS 16
! 1 Upstream component mode
! 2 Receiver height
! 3 Receiver width
! 4 Overhang projection
! 5 Overhang gap
! 6 Overhang left extension
! 7 Overhang right extension
! 8 Left wingwall projection
! 9 Left wingwall gap
! 10 Left wingwall top extension
! 11 Left wingwall bottom extension
! 12 Right wingwall projection
! 13 Right wingwall gap
! 14 Right wingwall top extension
! 15 Right wingwall bottom extension
! 16 Receiver azimuth
0.0000000000000000E+00 1.5000000000000000E+00 1.0000000000000000E+00 1.0000000000000000E+00 5.0000000000000000E-01
5.0000000000000000E-01 5.0000000000000000E-01 1.0000000000000000E+00 5.0000000000000000E-01 5.0000000000000000E-01
5.0000000000000000E-01 1.0000000000000000E+00 5.0000000000000000E-01 5.0000000000000000E-01 5.0000000000000000E-01
-9.0000000000000000E+01
INPUTS 7
! Radiation:AISZ ->Solar zenith angle
! Radiation:AISA ->Solar azimuth angle
! Radiation:IT_H ->Total horizontal radiation
! Radiation:ID_H ->Horizontal diffuse radiation
! Radiation:IB_E ->Beam radiation on surface
! [unconnected] Ground reflectance
! Radiation:AI_E ->Incidence angle of direct radiation
AISZ AISA IT_H ID_H IB_E
CONST AI_E
*** INITIAL INPUT VALUES
4.5000000000000000E+01 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
2.0000000000000001E-01 0.0000000000000000E+00
*------------------------------------------------------------------------------
* Model "Type34-W_to_N" (Type 34)
*
UNIT 19 TYPE 34
*$UNIT_NAME Type34-W_to_N
*$MODEL .\Loads and Structures\Overhang and Wingwall Shading\Type34.tmf
*$POSITION 401 402
*$LAYER Main #
PARAMETERS 16
! 1 Upstream component mode
! 2 Receiver height
! 3 Receiver width
! 4 Overhang projection
! 5 Overhang gap
! 6 Overhang left extension
! 7 Overhang right extension
! 8 Left wingwall projection
! 9 Left wingwall gap
! 10 Left wingwall top extension
! 11 Left wingwall bottom extension
! 12 Right wingwall projection
! 13 Right wingwall gap
! 14 Right wingwall top extension
! 15 Right wingwall bottom extension
! 16 Receiver azimuth
0.0000000000000000E+00 1.5000000000000000E+00 1.0000000000000000E+00 1.0000000000000000E+00 5.0000000000000000E-01
5.0000000000000000E-01 5.0000000000000000E-01 1.0000000000000000E+00 5.0000000000000000E-01 5.0000000000000000E-01
5.0000000000000000E-01 1.0000000000000000E+00 5.0000000000000000E-01 5.0000000000000000E-01 5.0000000000000000E-01
9.0000000000000000E+01
INPUTS 7
! Radiation:AISZ ->Solar zenith angle
! Radiation:AISA ->Solar azimuth angle
! Radiation:IT_H ->Total horizontal radiation
! Radiation:ID_H ->Horizontal diffuse radiation
! Radiation:IB_W ->Beam radiation on surface
! [unconnected] Ground reflectance
! Radiation:AI_W ->Incidence angle of direct radiation
AISZ AISA IT_H ID_H IB_W
CONST AI_W
*** INITIAL INPUT VALUES
4.5000000000000000E+01 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
2.0000000000000001E-01 0.0000000000000000E+00
*------------------------------------------------------------------------------
* Model "Type34-W_to_S" (Type 34)
*
UNIT 20 TYPE 34
*$UNIT_NAME Type34-W_to_S
*$MODEL .\Loads and Structures\Overhang and Wingwall Shading\Type34.tmf
*$POSITION 401 456
*$LAYER Main #
PARAMETERS 16
! 1 Upstream component mode
! 2 Receiver height
! 3 Receiver width
! 4 Overhang projection
! 5 Overhang gap
! 6 Overhang left extension
! 7 Overhang right extension
! 8 Left wingwall projection
! 9 Left wingwall gap
! 10 Left wingwall top extension
! 11 Left wingwall bottom extension
! 12 Right wingwall projection
! 13 Right wingwall gap
! 14 Right wingwall top extension
! 15 Right wingwall bottom extension
! 16 Receiver azimuth
0.0000000000000000E+00 1.5000000000000000E+00 1.0000000000000000E+00 1.0000000000000000E+00 5.0000000000000000E-01
5.0000000000000000E-01 5.0000000000000000E-01 1.0000000000000000E+00 5.0000000000000000E-01 5.0000000000000000E-01
5.0000000000000000E-01 1.0000000000000000E+00 5.0000000000000000E-01 5.0000000000000000E-01 5.0000000000000000E-01
9.0000000000000000E+01
INPUTS 7
! Radiation:AISZ ->Solar zenith angle
! Radiation:AISA ->Solar azimuth angle
! Radiation:IT_H ->Total horizontal radiation
! Radiation:ID_H ->Horizontal diffuse radiation
! Radiation:IB_W ->Beam radiation on surface
! [unconnected] Ground reflectance
! Radiation:AI_W ->Incidence angle of direct radiation
AISZ AISA IT_H ID_H IB_W
CONST AI_W
*** INITIAL INPUT VALUES
4.5000000000000000E+01 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
2.0000000000000001E-01 0.0000000000000000E+00
*------------------------------------------------------------------------------
END
TRANSIENT SIMULATION STARTING AT TIME = 0.0000000000000000E+00
STOPPING AT TIME = 8.7600000000000000E+03
TIMESTEP = 1 / 1
DIFFERENTIAL EQUATION ERROR TOLERANCE = 1.0000000000000002E-03
ALGEBRAIC CONVERGENCE TOLERANCE = 1.0000000000000002E-03
DIFFERENTIAL EQUATIONS SOLVED BY MODIFIED EULER
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : The following Types were loaded from TRNDll.dll: Type109, Type55, Type34, Type65, Type56, Type69, Type33
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "TESSApplicationsLibrary_ReleaseVersion203.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "TESSControlsLibrary_ReleaseVersion203.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "TESSGHPLibrary_ReleaseVersion203.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "TESSGreenBuildingLibrary_ReleaseVersion203.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "TESSGroundCouplingLibrary_ReleaseVersion203.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "TESSHVACLibrary_ReleaseVersion203.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "TESSHydronicsLibrary_ReleaseVersion203.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "TESSLoadsAndStructuresLibrary_ReleaseVersion203.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "TESSOptimizationLibrary_ReleaseVersion203.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "TESSSolarLibrary_ReleaseVersion203.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "TESSStorageLibrary_ReleaseVersion203.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "TESSUtilityLibrary_ReleaseVersion203.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "type127.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "Type157_demo_release.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "type210.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 199 : TRNSYS found at least one user DLL in the UserLib directory. (Note: Only DLL's including Types that are used in the simulation are loaded)
Reported information : 0 user DLLs were loaded after searching in "C:\Programme\Trnsys16_1\UserLib\ReleaseDLLs"
*** Notice at time : 0.000000
Generated by Unit : 56
Generated by Type : 56
Message : TRNFLOW multi zone air flow model integrated
*** Notice at time : 0.000000
Generated by Unit : 56
Generated by Type : 56
Message : Active layers and internal window calculations integrated
*** Notice at time : 0.000000
Generated by Unit : 56
Generated by Type : 56
Message : Star network calculation: every iteration step of TYPE 56
*** Notice at time : 0.000000
Generated by Unit : 13
Generated by Type : 109
Message :
VARIABLE COLUMN # IPOL MULTIPLIER ADD_FACTOR SAMPLING
----------------------------------------------------------------------------
==> IBEAM_H 4 - 1.0000 0.0000 -1
==> IDIFF_H 5 - 1.0000 0.0000 -1
==> TAMB 6 2 1.0000 0.0000 0
==> RHUM 8 1 1.0000 0.0000 0
==> WSPEED 7 1 1.0000 0.0000 0
----------------------------------------------------------------------------
LONGITUDE -29.19
LATITUDE 8.02
TIME SHIFT TO GMT 2
DATA TIME STEP 1.00
STARTTIME FOR DATA 1.00
SAMPLING FOR RAD. DATA -1.00
----------------------------------------------------------------------------
RADIATION MODE: IBEAM_H AND IDIFF_H ARE INPUTS
*** The TRNSYS components will be called in the following order:
Unit # 331 Type # 33
Unit # 69 Type # 69
Unit # 56 Type # 56
Unit # 13 Type # 109
Unit # 22 Type # 34
Unit # 15 Type # 34
Unit # 16 Type # 34
Unit # 17 Type # 34
Unit # 18 Type # 34
Unit # 19 Type # 34
Unit # 20 Type # 34
Unit # 14 Type # 55
Unit # 25 Type # 65
Unit # 21 Type # 65
*** Warning at time : 17.000000
Generated by Unit : 56
Generated by Type : 56
Message : Convergence of COMIS-TRNSYS iteration not attained within 50max. number of internal iterations!
*** Warning at time : 33.000000
Generated by Unit : 56
Generated by Type : 56
Message : Convergence of COMIS-TRNSYS iteration not attained within 50max. number of internal iterations!
*** Warning at time : 34.000000
Generated by Unit : 56
Generated by Type : 56
Message : Convergence of COMIS-TRNSYS iteration not attained within 50max. number of internal iterations!
*** Warning at time : 35.000000
Generated by Unit : 56
Generated by Type : 56
Message : Convergence of COMIS-TRNSYS iteration not attained within 50max. number of internal iterations!
*** Warning at time : 36.000000
Generated by Unit : 56
Generated by Type : 56
Message : Convergence of COMIS-TRNSYS iteration not attained within 50max. number of internal iterations!
*** Warning at time : 36.000000
Generated by Unit : 56
Generated by Type : 56
Message : Convergence of COMIS-TRNSYS iteration not attained within 50max. number of internal iterations!
*** Warning at time : 37.000000
Generated by Unit : 56
Generated by Type : 56
Message : Convergence of COMIS-TRNSYS iteration not attained within 50max. number of internal iterations!
*** Warning at time : 37.000000
Generated by Unit : 56
Generated by Type : 56
Message : Convergence of COMIS-TRNSYS iteration not attained within 50max. number of internal iterations!
*** Warning at time : 38.000000
Generated by Unit : 56
Generated by Type : 56
Message : Convergence of COMIS-TRNSYS iteration not attained within 50max. number of internal iterations!
*** Warning at time : 38.000000
Generated by Unit : 56
Generated by Type : 56
Message : Convergence of COMIS-TRNSYS iteration not attained within 50max. number of internal iterations!
*** Warning at time : 39.000000
Generated by Unit : 56
Generated by Type : 56
Message : Convergence of COMIS-TRNSYS iteration not attained within 50max. number of internal iterations!
*** Warning at time : 39.000000
Generated by Unit : 56
Generated by Type : 56
Message : Convergence of COMIS-TRNSYS iteration not attained within 50max. number of internal iterations!
*** Warning at time : 40.000000
Generated by Unit : 56
Generated by Type : 56
Message : Convergence of COMIS-TRNSYS iteration not attained within 50max. number of internal iterations!
*** Warning at time : 41.000000
Generated by Unit : 56
Generated by Type : 56
Message : Convergence of COMIS-TRNSYS iteration not attained within 50max. number of internal iterations!
*** Warning at time : 41.000000
Generated by Unit : 56
Generated by Type : 56
Message : Convergence of COMIS-TRNSYS iteration not attained within 50max. number of internal iterations!
*** Warning at time : 42.000000
Generated by Unit : 56
Generated by Type : 56
Message : Convergence of COMIS-TRNSYS iteration not attained within 50max. number of internal iterations!
*** Warning at time : 57.000000
Generated by Unit : 56
Generated by Type : 56
Message : Convergence of COMIS-TRNSYS iteration not attained within 50max. number of internal iterations!
*** Warning at time : 58.000000
Generated by Unit : 56
Generated by Type : 56
Message : Convergence of COMIS-TRNSYS iteration not attained within 50max. number of internal iterations!
*** Warning at time : 59.000000
Generated by Unit : 56
Generated by Type : 56
Message : Convergence of COMIS-TRNSYS iteration not attained within 50max. number of internal iterations!
*** Warning at time : 59.000000
Generated by Unit : 56
Generated by Type : 56
Message : Convergence of COMIS-TRNSYS iteration not attained within 50max. number of internal iterations!
*** Warning at time : 60.000000
Generated by Unit : 56
Generated by Type : 56
Message : Convergence of COMIS-TRNSYS iteration not attained within 50max. number of internal iterations!
*** Warning at time : 60.000000
Generated by Unit : 56
Generated by Type : 56
Message : Convergence of COMIS-TRNSYS iteration not attained within 50max. number of internal iterations!
*** Warning at time : 61.000000
Generated by Unit : 56
Generated by Type : 56
Message : Convergence of COMIS-TRNSYS iteration not attained within 50max. number of internal iterations!
*** Warning at time : 61.000000
Generated by Unit : 56
Generated by Type : 56
Message : Convergence of COMIS-TRNSYS iteration not attained within 50max. number of internal iterations!
*** Warning at time : 62.000000
Generated by Unit : 56
Generated by Type : 56
Message : Convergence of COMIS-TRNSYS iteration not attained within 50max. number of internal iterations!
*** Warning at time : 62.000000
Generated by Unit : 56
Generated by Type : 56
Message : Convergence of COMIS-TRNSYS iteration not attained within 50max. number of internal iterations!
*** Warning at time : 63.000000
Generated by Unit : 56
Generated by Type : 56
Message : Convergence of COMIS-TRNSYS iteration not attained within 50max. number of internal iterations!
*** Warning at time : 63.000000
Generated by Unit : 56
Generated by Type : 56
Message : Convergence of COMIS-TRNSYS iteration not attained within 50max. number of internal iterations!
*** Warning at time : 64.000000
Generated by Unit : 56
Generated by Type : 56
Message : Convergence of COMIS-TRNSYS iteration not attained within 50max. number of internal iterations!
*** Warning at time : 64.000000
Generated by Unit : 56
Generated by Type : 56
Message : Convergence of COMIS-TRNSYS iteration not attained within 50max. number of internal iterations!
*** Warning at time : 65.000000
Generated by Unit : 56
Generated by Type : 56
Message : Convergence of COMIS-TRNSYS iteration not attained within 50max. number of internal iterations!
*** Fatal Error at time : 65.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 450 : The maximum number of warnings allowed per simulation has been exceeded. Please fix these warnings or increase the limit on the number of warnings allowed per simulation (LIMITS command)
Reported information : Not available
*** Notice at time : 65.000000
Generated by Unit : 56
Generated by Type : 56
Message : Geometrical distribution factors for direct solar (GEOSURF) in zone 1 equal zero occurred. Direct solar radiaton is treated as diffuse radiation!
*** Notice at time : 65.000000
Generated by Unit : 56
Generated by Type : 56
Message : Geometrical distribution factors for direct solar (GEOSURF) in zone 2 equal zero occurred. Direct solar radiaton is treated as diffuse radiation!
*** Notice at time : 65.000000
Generated by Unit : 56
Generated by Type : 56
Message : Geometrical distribution factors for direct solar (GEOSURF) in zone 3 equal zero occurred. Direct solar radiaton is treated as diffuse radiation!
*** Notice at time : 65.000000
Generated by Unit : 56
Generated by Type : 56
Message : Geometrical distribution factors for direct solar (GEOSURF) in zone 4 equal zero occurred. Direct solar radiaton is treated as diffuse radiation!
*** Notice at time : 65.000000
Generated by Unit : 56
Generated by Type : 56
Message : Geometrical distribution factors for direct solar (GEOSURF) in zone 5 equal zero occurred. Direct solar radiaton is treated as diffuse radiation!
==========================================================================================
TYPE56 TIME REPORT: (for debugging purpose)
------------------------------------------------------------------------------------------
time_report_unit: 6
time_filter: .8760E+07 [ms]
==========================================================================================
Level0 Level1 Level2 Level3 Level4 Counter DTime[ms] TTime[ms]
==========================================================================================
==========================================================================================
TYPE109 TIME REPORT: (for debugging purpose)
------------------------------------------------------------------------------------------
time_report_unit: 6
time_filter: .8760E+07 [ms]
==========================================================================================
Level0 Level1 Level2 Level3 Level4 Counter DTime[ms] TTime[ms]
==========================================================================================
zwischenzeit 1 : 0.000000000000000E+000
zwischenzeit 2 : 0.000000000000000E+000
zwischenzeit 3 : 0.000000000000000E+000
zwischenzeit 4 : 0.000000000000000E+000
zwischenzeit 5 : 0.000000000000000E+000
zwischenzeit 6 : 0.000000000000000E+000
zwischenzeit 7 : 0.000000000000000E+000
zwischenzeit 8 : 0.000000000000000E+000
zwischenzeit 9 : 0.000000000000000E+000
zwischenzeit 10 : 0.000000000000000E+000
itest : 319
Summe : 0.000000000000000E+000
*********************************************************************************************************
The Following UNIT Numbers, TYPE Numbers, and Logical Units Were Used in the Supplied TRNSYS Input File:
13 33 4
14 34 6
15 55 9
16 56 31
17 65 32
18 69 33
19 109 34
20 35
21 40
22 41
25
56
69
331
*********************************************************************************************************
Total TRNSYS Calculation Time: 5.4200 Seconds