[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TRNSYS-users] ventilation double flux on trnsys

Dear Faustine,

You have to use a heat exchanger in the simulation studio (type 5 or type 91 for instance) and link :
   - [Type 56] Tair - Zone A -------------------------> [Heat exchanger] Hot side temperature
   - [Weather data] Ambient temperature -------> [Heat Exchanger] Cold side temperature

Air flowrate should be the same on both (hot and cold) sides. You can set it directly into the heat exchanger type if it is constant or define an equation which set the air flowrate considering other conditions.

King regards,

Damien Gondre
---------------------------------------
Centre de thermique de Lyon (CETHIL)
UMR 5008 - Insa de Lyon, UCBL, CNRS
Bâtiment Sadi Carnot
69621 Villeurbanne Cedex
France
+334 72 43 84 68



On Fri, Mar 30, 2012 at 2:12 PM, faustine escoffier <escoffier.faustine@gmail.com> wrote:
How to modelise a double flux ventilation on trnsys, in the simulation studio?
Thanks.
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@cae.wisc.edu
https://mailman.cae.wisc.edu/listinfo/trnsys-users