[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [TRNSYS-users] Long wave radiation and internal convection
Dear Ivan Flores Abascal,
yes, in TRNSYS 17 you can use NTYPE 110 - Energy gain/loss by longwave
radiation exchange with other surfaces
Best,
Marion
Dipl.-Ing. Marion Hiller
TRANSSOLAR: KlimaEngineering - Technologien für energieeffizientes Bauen
und Nutzerkomfort in Gebäude
Munich - New York - Stuttgart + 49.711.67976.0
Transsolar Energietechnik GmbH, Curiestrasse 2, 70563 Stuttgart
Amtsgericht Stuttgart - HRB 23347, Steuernummer 99073/00911, USt-IdNr.:
DE152272639
Geschäftsführer: Dipl.Ing. Matthias Schuler, Dipl.Ing. Thomas Auer,
Dipl.Phys. Stefan Holst, Prof. Dipl.-Ing. Bleicher
-----Ursprüngliche Nachricht-----
Von: Ivan Flores Abascal [mailto:ivan.flores@ehu.es]
Gesendet: Montag, 27. Februar 2012 23:13
An: trnsys-users@cae.wisc.edu
Betreff: [TRNSYS-users] Long wave radiation and internal convection
Dear Sir / Madam:
I would appreciate if you could clarify some doubts about how does
Type 56 treat the heat exchanged by convection and long wave
radiation. In the Type 56 user' manual appears:
The long-wave radiation exchange between the surfaces within the zone
and the convective heat flux from the inside surfaces to the zone air
are approximated using the star network given by Seem...
The star temperature can be used to calculate a net radiative and
convective heat flux from the inside wall surface:
Q_comb,s,i = Q_c,s,i + Q_r,s,i = (T_s,i T_star) / (R_equiv,i
A_s,i)"
I assume that Q_comb,s,i is equal to QCOMI (NTYPE 19). Is it correct?
If h_i is the internal convection coefficient, can I calculate the
convective heat flux from surface i as: Q_c,s,i = h_i A_s,i
(T_s,i T_star) ?
I have solved the radiation exchange by the view factor method and I
have compared the results with the value obtained as Q_r,s,i = QCOMI
Q_c,s,i . The results are quite different so I think that difference
is not for being an approximate method. Is there anything I
misunderstood?
Is there any NTYPE to obtain the long wave radiation from a surface
separately?
Thank you very much for your help
Ivan Flores
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@cae.wisc.edu
https://mailman.cae.wisc.edu/listinfo/trnsys-users