|
Hello Everyone, I have made a simple cooling load calculation model in
TRNSYS v16 and similar setup in E-quest. There is vast variation in cooling
load when I put into outdoor air in the room. In TRNSYS I used 2800 sqft area building having 150 person
occupancy and according to ASHRAE 62 (ventilation rate procedure) I calculated
1150 CFM outdoor air as fresh air. When I taking no outdoor air the cooling
load is about 10 ton but when I put outdoor air through ventilation (2.46 ACH)
the cooling load increases and reached at 42 ton. And in E-quest it increase only 1 ton. Can anyone help me to find out the reason? I attached bui. File and tpf file. Regards Mayank |
Attachment:
LoadCal_v1.tpf
Description: Binary data
Attachment:
school hall_v5_2.bui
Description: Binary data
Attachment:
IN-New-Delhi-421820.tm2
Description: Binary data