Hello,
I have a problem with the type536 (linear parabolic concentrator). I found a conflict between the initial temperature of the collector and the ambient temperature linked to the weather file.
If i set an initial temperature of the collector of 20C the simulation stuck and TRNSYS.exe seems to go in loop (any error appears). But if I put the initial temperature at higher value like 160C the simulation start properly (and works also with a T>=27.5C).
I try to check the code file but I didn’t find any error. Somebody can help me please? I have attached the file of the simulation.
Thank you very much!
Best regards
Sergio Pintaldi
Master's Student (University of Trieste, Italy)
DET, Newcastle
CSIRO Energy Centre
Steel River Estate, 10 Murray Dwyer Cct,
Mayfield West, NSW 2304
Ph 02 4960 6127,
Email: Sergio.Pintaldi@csiro.au
PLEASE NOTE
The information contained in this email may be confidential or privileged. Any unauthorised use or disclosure is prohibited. If you have received this email in error, please delete it immediately and notify the sender by return email. Thank you. To the extent permitted by law, CSIRO does not represent, warrant and/or guarantee that the integrity of this communication has been maintained or that the communication is free of errors, virus, interception or interference.
Please consider the environment before printing this email.