[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TRNSYS-users] Adding door TRNSYS 3d



Nidal and David,

 

I’m not sure if I understand problem, but I have just create single-family house and I modeled only exterior door.

 

I defined this door as window and create this door using WINDOW 6 (software of Lawrence Berkeley National Laboratory – free download): u-value=2.6 W/m^2K and g-value=0.144

 

It seems to me that interior door are also possible to define this way.

 

It seems to me that in Google SketchUp edge of window/door can’t overlap with edge of wall. To respect this you can make door which begin a few centimeters above lower edge of wall

 

I’m beginner in TRNSYS, so I’m not sure if my ideas are well!!!

 

I enclose pdf  with instruction how to create window in WINDOW and introduce it to TRNBuild library.

 

Good luck

------------------------------------------------

Karol Bandurski MSc.

Institute of Environmental Engineering

Poznan University of Technology

www.ee.put.poznan.pl

www.put.poznan.pl

 

 

 

 

From: David BRADLEY [mailto:d.bradley@tess-inc.com]
Sent: Monday, October 17, 2011 6:34 PM
To: Nidal Abdalla
Cc: TRNSYS-users
Subject: Re: [TRNSYS-users] Adding door TRNSYS 3d

 

Nidal,
  This is a bit of a problem in the Trnsys3D plugin; the developers are working on a solution. I have had some success in breaking my wall up into a "wall" part and a "door" part but this can be tricky because you don't want the door to get recognized as a window. I then set the two parts as different wall types and take care of correcting the construction in TRNBuild.
  If there are not very many doors in your zone, I would recommend that you just ignore them. I only took them into account because I was simulating a garage that had well insulated wall and completely uninsulated (very large) garage doors.
Best,
 David


On 10/17/2011 05:55, Nidal Abdalla wrote:

Dear All

I am working with multi-zone building using TRNbuild, and I wonder if you can help me how I can add or identify a DOOR to the one zone building.

Also I could'nt add or identify a door by using Trnsys3D.

 

Best Regards

Nidal Abdalla




_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@cae.wisc.edu
https://mailman.cae.wisc.edu/listinfo/trnsys-users



-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA
 
P:+1.608.274.2577
F:+1.608.278.1475
d.bradley@tess-inc.com
 
http://www.tess-inc.com
http://www.trnsys.com

Attachment: windowtutorial.pdf
Description: Adobe PDF document