Ehsan,
There is a way of accomplishing this.
1. create a new *.bui file for each parametric run that you want
to do each one varying whatever parameter(s) you want.
2. replace the line in your input file that assigns an integer
logical unit number to the *.bui file with a series of them, each
having a different value. For example, if the line in the input
file is:
ASSIGN c:\Trnsys17\MyProjects\EhsanBuilding\building.bui 31
then you might replace that line with:
ASSIGN c:\Trnsys17\MyProjects\EhsanBuilding\building_option1.bui
31
ASSIGN c:\Trnsys17\MyProjects\EhsanBuilding\building_option2.bui
32
ASSIGN c:\Trnsys17\MyProjects\EhsanBuilding\building_option3.bui
33
ASSIGN c:\Trnsys17\MyProjects\EhsanBuilding\building_option4.bui
34
ASSIGN c:\Trnsys17\MyProjects\EhsanBuilding\building_option5.bui
35
ASSIGN c:\Trnsys17\MyProjects\EhsanBuilding\building_option6.bui
36
3. Define the following equation:
CONSTANTS 1
LU_bui = 31
4. Change the first parameter of Type56 from:
31 ! 1 Logical unit for building description file (.bui)
to
LU_bui ! 1 Logical unit for building description file (.bui)
5. finally, select LU_bui as your variable to change from one
parametric run to the next and enter the values 31 through 36 in
the parametric table.
As a side note, this is a way of running the same system for a lot
of different weather files in a parametric table too!
Best,
David
On 9/26/2011 07:03, hotline wrote:
Hi Ehsan,
with TRNEDIT you can only adapt
INPUTS of TRNBUILD, that are defined in the *.dck file.
Regards
Christian
TRANSSOLAR
Software Team
hotline@transsolar.com
www.trnsys.de
Transsolar KlimaEngineering -
Technologien für energieeffizientes Bauen und Nutzerkomfort
in Gebäuden
Transsolar
Energietechnik GmbH, Curiestrasse 2, 70563 Stuttgart /
Amtsgericht Stuttgart - HRB 23347 / UsSt.-Id: DE152272639
Geschäftsführer:
Dipl.Ing. Matthias Schuler, Dipl.Ing. Thomas Auer,
Dipl.Phys. Stefan Holst, Prof. Volkmar
Bleicher
Can we use TRNEdit for parametric run
of parameters specified in *.bui and not *.dck?
Regards
Ehsan
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@cae.wisc.edu
https://mailman.cae.wisc.edu/listinfo/trnsys-users
--
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI 53703 USA
P:+1.608.274.2577
F:+1.608.278.1475
d.bradley@tess-inc.com
http://www.tess-inc.com
http://www.trnsys.com
|