|
Hi, I am trying to valuate a new type that I have made in
trnsys 16 with some experimental measurements. To do this I need to import some measurement weather
data (Total solar rad, Tamb, Wind speed and direction, RH, a room temperature, and
a voltage) The measurements that I have are based on time
interval of 5min. So I fount that I could use the type9a (Utility àData readers -->Generic Data
FilesàFirst
Line is Simulation Start àFree
Format) The problem that I have is that if I input a dt=5min
on type9a and the same dt in simulation, it does not run. If I Input dt=5min on Type9a and 1min in simulation
it runs but in results of the total simulation time is the double minus 1 hour
from the expected!!! With that I mean that I got the results of one day (24
hr) twice in this time period minus 1 hr. (For 24 hours of simulation I got
a curve of 47 hours) It is like the trnsys reads the input file in about
the half time of the real so I get 2 times this file Could someone help here? Thank you in advanced Regards Kordou |