[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[TRNSYS-users] Moisture transfer with the exterior



Dear All,

I’m dealing with moisture transfer issues through porous building elements. I aim to simulate this topic with Type 56.

As you know T.56 does not model any moisture transfer with the exterior, so external climate has no effect on moisture balance within a thermal zone.

Is there any dedicated Type or trick in order to carry out this calculation in parallel with heat transfer?

Regards,

 

Matteo D’Antoni, PhD

Institute for Renewable Energy

 

EURAC Research

Viale Druso/Drususallee 1

39100 Bolzano/Bozen (BZ)

Italy

 

t +39 0471 055 614

f +39 0471 055 699

matteo.dantoni@eurac.edu

www.eurac.edu

 

This transmission is intended only for the use of the addressee and may contain confidential or legally privileged information.
If you receive this transmission by error, please notify the author immediately by mail and delete all copies of this transmission and any attachments.
Any use or dissemination of this communication is strictly prohibited by the "Privacy-Code", D.Lgs. 196/2003 and may conduct to penal prosecution and liability for damages.