[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TRNSYS-users] Inputs to TESS Type980



Dear Angela,

Thank you for bringing this to our attention. It appears that the cycling in the proforma has not been implemented as you mentioned. This is fixed for the next TESS Libraries update.

Best regards,

Matt Duffy


----- Original Message -----
From: "Angela Dröscher" <angela.droescher@tugraz.at>
Sent: Mon, August 29, 2011 11:27
Subject: [TRNSYS-users] Inputs to TESS Type980

Dear Trnsys-Users,

I just tried to use the ON and OFF runtime calcuator (Type980) from the TESS utility
library. There is a parameter for "number of signals to watch", however, this
parameter does not seem to have any effect on the number of inputs and outputs (and
causes an error if set to >1).
Apperently, this is just a problem of the proforma that can simply be fixed by
creating a cycle for the inputs and outputs - maybe this information is helpful for
someone out there...
And maybe TESS can put this issue on the bugfix-list for the next update...

Best regards,
Angela


-- 
Technische Universität Graz
Institut für Wärmetechnik
Inffeldgasse 25/B
A-8010 Graz
Tel.: (+43) 316 873 7307
Fax: (+43) 316 873 7305
http://www.iwt.tugraz.at
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@cae.wisc.edu
https://mailman.cae.wisc.edu/listinfo/trnsys-users