That’s what I did finally… but not really understanding what’s happen, not so good.
Here’s what I’ve tested, if it can helps someone.
W7 IVF11.1 MVS2008
<target/project> TRNDLL Mytype Results
release
runtime library: multithreaded (static) multithreaded
ignore spec lib : Build ok ,
simulation ok
runtime library: multithreaded (static) multithreaded DLL
ignore spec lib : Build ok ,
simulation ok : I keep this choice
runtime library: multithreaded DLL multithreaded
ignore spec lib : msvcrt.lib Build ok
runtime library: multithreaded DLL multithreaded DLL
ignore spec lib : msvcrt.lib Build ok but no types
can be loaded at runtime by trnexe from mytype.dll ????
debug
runtime library: multithreaded (static) multithreaded
ignore spec lib :
idem
runtime library: multithreaded (static) multithreaded DLL
ignore spec lib :
idem
runtime library: multithreaded DLL multithreaded
ignore spec lib :
msvcrtd.lib idem
runtime library: multithreaded DLL multithreaded DLL
ignore spec lib :
msvcrtd.lib idem
De :
David BRADLEY [mailto:d.bradley@tess-inc.com]
Envoyé : jeudi 11 août 2011 17:24
À : CHEZE David 227480
Cc : trnsys-users@engr.wisc.edu
Objet : Re: [TRNSYS-users] TRNSYS17 IVF111 - building solution (mytype+trndll)
David,
It might be simpler just to add your Type to the TRNDll. The only reason that we provide the mytype project is so that you don't have to recompile the TRNDll. If you have to recompile the TRNDll anyway for some other purpose then its far simpler to keep all
of your Types (the standard ones and whatever ones you have written) in the TRNDll project; it makes stepping through the code one line at a time while debugging MUCH easier.
Regards,
David
On 8/11/2011 07:00, CHEZE David 227480 wrote:
Hi,
I’m puzzling while trying to build whole solution from latest ivf111 directory provided in the last TRNSYS17.0019 installation, building dlls that can run my projects (some build looks correct while failing to run TRNSYS
project).
I need to build trndll because of user types running in legacy mode and I need to build mytype including sourcode of all of my more recent user types.
Because some of mytype’s types have to access data file referenced by an assign statement in my decks, mytype and trndll have to be build with the same runtime library (and same version release/debug) : in the ivf101
solution for mytype provided on trnsys website, runtime library is ‘multithreaded dll’ while it is ‘multithreaded’ only in ivf111 directory from the latest installation of TRNSYS17 and both are different from what is said about that for ivf in the latest TRNSYS
programmer guide… it’s not so clear also about the ignored libraries…
Please can you confirm what is the right configuration of the solution, both for trndll and mytype
Thanks,
David Chèze
tel. 0479601437 - INES, CEA/Leth - Le Bourget du Lac (73), FRANCE - bât. PUMA3 bur. 204
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@cae.wisc.edu
https://mailman.cae.wisc.edu/listinfo/trnsys-users
--
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI 53703 USA
P:+1.608.274.2577
F:+1.608.278.1475
d.bradley@tess-inc.com
http://www.tess-inc.com
http://www.trnsys.com