Hi all,
I’m
trying to use special cards, but I got problems in running
the .tpf. As a test, I created a very simple tpf with only
one component Cp HS Type63. When I run this tpf I get the
following error 39: “The TRNSYS Processor has reported that
the user has specified LABELS for a component model where
they are not allowed”.
What’s
going wrong?
The
deck is as follows:
VERSION
16.1
*******************************************************************************
***
TRNSYS input file (deck) generated by TrnsysStudio
***
on donderdag, mei 19, 2011 at 10:25
***
from TrnsysStudio project: L:\Program
Files\Trnsys16_1\MyProjects\9198 TRNSYS modulen DWA\DWAcompo
v0.tpf
***
***
If you edit this file, use the File/Import TRNSYS Input File
function in
***
TrnsysStudio to update the project.
***
***
If you have problems, questions or suggestions please
contact your local
***
TRNSYS distributor or mailto:software@cstb.fr
***
*******************************************************************************
*******************************************************************************
***
Units
*******************************************************************************
*******************************************************************************
***
Control cards
*******************************************************************************
*
START, STOP and STEP
CONSTANTS
3
START=0
STOP=168
STEP=1
*
User defined CONSTANTS
SIMULATION
START STOP STEP ! Start time End time
Time step
TOLERANCES
0.001 0.001 !
Integration Convergence
LIMITS
30 30 30 ! Max
iterations Max warnings Trace limit
DFQ
1 ! TRNSYS
numerical integration solver method
WIDTH
80 ! TRNSYS
output file width, number of characters
LIST
! NOLIST
statement
! MAP statement
SOLVER
0 1 1 ! Solver
statement Minimum relaxation factor Maximum
relaxation factor
NAN_CHECK
0 ! Nan DEBUG statement
OVERWRITE_CHECK
0 ! Overwrite DEBUG
statement
TIME_REPORT
0 ! disable time report
EQSOLVER
0 ! EQUATION SOLVER
statement
*
Model "Type63" (Type 63)
*
UNIT
6 TYPE 63 Type63
*$UNIT_NAME
Type63
*$MODEL
.\Physical Phenomena\Thermodynamic Properties\NASA
CEA2\Type63.tmf
*$POSITION
435 189
*$LAYER
Main #
PARAMETERS
2
1
! 1 Mode
30
! 2 Logical unit number of data file
INPUTS
1
0,0
! [unconnected] Temperature
***
INITIAL INPUT VALUES
20
LABELS
1
xcxcxcx
***
External files
ASSIGN
"L:\Program Files\Trnsys16_1\Examples\Data
Files\Type63-thermo.lib" 30
*|?
Which file contains the thermodynamic data? |1000
*------------------------------------------------------------------------------
END