[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [TRNSYS-users] Problem with using Linear parabolic concentarator
Dear Dr. Mohammad Abdunnabi,
First of all, there has since been some updates to Type536. I will have
TESS Technical Support send you the updates in an ensuing email. I am not
too familiar with the concentration ratio for that component, but fore
more information you can view the documentation and the Duffie and Beckman
text.
Best regards,
Matt Duffy
----- Original Message -----
From: "mohammad abdunnabi" <moh_jum@yahoo.com>
Sent: Mon, May 16, 2011 2:23
Subject:[TRNSYS-users] Problem with using Linear parabolic concentarator
Dear TRNSYS Users
I'm having a PROBLEM with the using of Linear parabolic concentarator, the
outlet
tempertaure is always very high up to the max. outlet temperature that you
set
in the input parameter (no. 6). I have changed the area to the minimum ,the
concentartion ratio, and also flow rate but without any effect (still the
outlet
tempertaure very high). I would be very grateful, if any one have time and
can
check the attached file, and let me where is my mistake
Many thanks in advance
Dr. Mohammad Abdunnabi
Head of Thermal Energy conversion Department
Center for Solar Energy Research and Studies (CSERS)
Tripoli-Libya
P.O.Box: 12932
Tel.: +218 21 3699323
Fax.: +218 21 3699322
Office Phone: +218 21 7201993
Mobile Phone: +218 92 2256067 _______________________________________________
TRNSYS-users mailing list
TRNSYS-users@cae.wisc.edu
https://mailman.cae.wisc.edu/listinfo/trnsys-users
----- End of original message -----