[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TRNSYS-users] wall transfer fuction coefficient

Hello,

That is suppose to be the timebase NOT the timestep.

When you have thick walls, you need to increase the timebase in TRNBuild. To do this, click on the 'Outputs' button in the project window, and the timebase field is towards the top of the 'Outputs' window. Usually a timebase of 2 will suffice for thick walls.

Best regards,

Matt Duffy


----- Original Message -----
From: "" <pseudomino@gmx.com>
Sent: Tue, April 26, 2011 6:57
Subject: Re: [TRNSYS-users] wall transfer fuction coefficient

I got once this error.
It was with a very thick wall (about 1 m).

I managed to continue with no error by changing the timestep from 1h to 1.5h
But I don't know why !
----- Original Message -----
To: TRNSYS
Sent: Tuesday, April 26, 2011 12:02 PM
Subject: [TRNSYS-users] wall transfer fucti! on coefficient
 

Dear TRNSYS users,

 

I am using Type 56 .  I would like to build a wall with U values equal to 0.11 (passive-house wall), but I get an error from TRNBILD. the error is enclosed.

 

Anyone of you knows how can I solve the problem

 

Thank you in advance,

Kamyar Nasrollahi

 
Kamyar Nasrollahi
 
 
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@cae.wisc.edu
https://mailman.cae.wisc.edu/listinfo/trnsys-users