[TRNSYS-users] NTYPE 906: Energy balance for surfaces

[王洋 <wanghongyang1767@gmail.com>]

Dear all,

    I have some questions about NTYPE 906: Energy balance for surfaces:

   1. Please see the ATTACHED.
      
     
 Based on the Manual, B6_BAL should be always 0, but here i think its 
calculation is wrong. B6_BAL isn't  -8.180E-13, it should be 2.683E-03, 
so it's not 0, PLEASE tell me some possible reasons about it. 
     1_B6_BAL  = -   1_B6_DQWALLdt-   1_B6_QCOMI+   1_B6_QCOMO+   1_B6_QRADGI+    1_B6_QRADGO-    1_B6_QALG 

      -8.180E-13     -3.838E+03      2.683E-03     -3.838E+03      0.000E+00      0.000E+00      0.000E+00

2. B6_DQWALLdt in Manual is change of internal energy of surface, but 
it's a little abstract. Here I only used the heatings in TRNBUILD, no 
other internal gains. PLEASE give me some examples about change of 
internal energy of surface. Is it energy Generation of Wall etc.? Why 
here is  minus (-3.838E+03)? What's difference between  B6_DQWALLdt and 
B6_QCOMO? Why here they are the same? Is there some reasons?

3. I think B6_QCOMI is some heat flux enter into inside of wall such
 as the heat from the heatings of indoor and the solar radiation, Is it 
right?   B6_QCOMO is heat loss from the wall outside, Is it right? If 
wrong, PLEASE tell me what are their meaning.

Thanks!

br.

wang

2011/3/7 <trnsys-users-request@cae.wisc.edu>

Send TRNSYS-users mailing list submissions to
       trnsys-users@cae.wisc.edu

To subscribe or unsubscribe via the World Wide Web, visit
       https://mailman.cae.wisc.edu/listinfo/trnsys-users
or, via email, send a message with subject or body 'help' to
       trnsys-users-request@cae.wisc.edu

You can reach the person managing the list at
       trnsys-users-owner@cae.wisc.edu

When replying, please edit your Subject line so it is more specific
than "Re: Contents of TRNSYS-users digest..."

Today's Topics:

  1. Re: Strange error (hotline)
  2. Questions...please reply (Juv?ncio Correia Tavares)


---------- 已转发邮件 ----------
From: "hotline" <hotline@transsolar.com>
To: rraye001 <rraye001@fiu.edu>
Date: Mon, 7 Mar 2011 13:33:34 +0100
Subject: Re: [TRNSYS-users] Strange error

Hi,

 

seems like you hit a limit for the generation of the transfer function coefficients.

Please check if the roof is defined correctly.

 

Regards

Christian

 

TRANSSOLAR Software Team

hotline@transsolar.com

 

www.trnsys.de

Transsolar KlimaEngineering - Technologien für energieeffizientes Bauen und Nutzerkomfort in Gebäuden                                   

Transsolar Energietechnik GmbH, Curiestrasse 2, 70563 Stuttgart / Amtsgericht Stuttgart - HRB 23347 / UsSt.-Id: DE152272639

Geschäftsführer: Dipl.Ing. Matthias Schuler, Dipl.Ing. Thomas Auer, Dipl.Phys. Stefan Holst, Prof. Volkmar Bleicher

 

---

   Von: Rambod Rayegan [mailto:rraye001@fiu.edu]
Gesendet: Samstag, 5. März 2011 06:08
An: trnsys-users@cae.wisc.edu
Betreff: [TRNSYS-users] Strange error

Dear TRNSYS users:

 

I am working on a model created buy TRNSYS 3d plugin in google sketchup for couple of months. Everyday I add  something to it or modify some parameters in it. Today, I have just changed the roof type in the building type 56 and tried to run it again but I have received the following error:

 

 

Visual Fortran run-time error

 

fortrtl:severe(64):input conversion error, unit 56, file C:\.....building.trn 

Image PC Routine Source DFORRT.DLL  02014C49 Unknown  Unknown Unknown

 

 

Anybody has an idea to solve the issue?

 

Thank you.

Rambod Rayegan
Ph.D Candidate
Mechanical Engineering Department
Florida International University
10555 W Flagler St, EC3620
Miami, FL, 33174
 
305-348-3558 (Office)
786-218-7375(Cell)
305-348-1932 (Fax)

---------- 已转发邮件 ----------
From: "Juvêncio Correia Tavares" <juvenciotavares@hotmail.com>
To: <trnsys-users@engr.wisc.edu>
Date: Fri, 4 Mar 2011 15:16:10 +0000
Subject: [TRNSYS-users] Questions...please reply

I`m doing a dynamic simulation of buildings in TRNSYS, during the simulation gave the following error ... as you can see in the picture.

And also, I would like to send me a PDF about connection.

I await your response.

thanks.

_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@cae.wisc.edu
https://mailman.cae.wisc.edu/listinfo/trnsys-users

Attachment: ENERGY_SURF_ 1.BAL
Description: Binary data