Rekiyat
I does not matter which version do you have type 155 is planned to work with all versions (I think). But the problem is for some versions you have to rebuild dll file again.
Anyway, the only thing that I can do is sending you two off my dll with the following instruction.
1- As attached you can find two folder (old and new)
2- First download these two on you desktop
3- Then go to C:/Trnsys/exe and cut the file type 155.dll (your original dll file) from this folder to a safe place
4- Copy the old “ Type 155.dll” which I sent you instead of your original dll
5- Open the file Calling Matlab-MultipleUnits.tpf (located in c:/Trnsys/example/calling_matlab/)
6- If you was able to run this file without error that means your problem is solved
7- If not replace the second dll which I sent it to you “ new folder” (
8- If none of this two dll files solve the problem replace your original type 155 dll which you have already put in a safe place.
Hope it helps
Regards
Mehdi
From: Rekiya Suleiman [mailto:omohu_s@yahoo.com]
Sent: 22 February 2011 06:29
To: Mehdi Shahrestani
Subject: Re: [TRNSYS-users] Fw: error message in calling matlab from trnsys
Dear Mehdi
Thanks a lot for your mail, I have Matlab2006a. could this possibly be the reason for the error message.
Thanks again.
Rekiyat
From: Mehdi Shahrestani <mahdishahrestani@yahoo.com>
To: Rekiya Suleiman <omohu_s@yahoo.com>
Cc: trnsys-users@cae.wisc.edu
Sent: Mon, February 21, 2011 10:58:25 PM
Subject: RE: [TRNSYS-users] Fw: error message in calling matlab from trnsys
Dear Rekiyat
Couple of months ago I had the same problem. It should be related to the type155 dll file which calls Matlab.
This file some times is not compatible with your Matlab version.
Anyway, I have this dll for Matlab 2009a if you have the same version it could solve the problem.
Please let me know you matlab version.
Regards
Mehdi
From: trnsys-users-bounces@cae.wisc.edu [mailto:trnsys-users-bounces@cae.wisc.edu] On Behalf Of Rekiya Suleiman
Sent: 21 February 2011 21:32
To: trnsys-users@cae.wisc.edu
Subject: [TRNSYS-users] Fw: error message in calling matlab from trnsys
Dear trnsys users,
Please I am still waiting for help on the forwarded problem, please help!
Thanks
Rekiyat
----- Forwarded Message ----
From: Rekiya Suleiman <omohu_s@yahoo.com>
To: trnsys-users@cae.wisc.edu
Sent: Fri, February 18, 2011 8:03:40 PM
Subject: error message in calling matlab from trnsys
Hi,
Please can anyone help, I'm still learning to use the trnsys program. I am trying to use Type155 to call a code written in matlab but I keep getting the error message 'undefined command/function 'trnInputs'". What can I do to get out of this.
Rekiyat Suleiman
Dept of Mechanical Engineering
Ahmadu Bello University , Zaria
Nigeria .