Re: [TRNSYS-users] Ahu coupled with a secondary heating / cooling system

[Matias Garcia <matias.garcia0@gmail.com>]

Dear Trnsyws users,

I forgott to say that the supply air temperatures from the AHU are 20°C for winter and 18°C for summer. i could understand that there is no change in winter as my set point is 20°, but in summer with a set point temperature between 24-28°C there should be a difference on the cooling load when sending more or less air

2011/2/1 Matias Garcia <matias.garcia0@gmail.com>

Dear Trnsys users,

I am simulaitng an AHU coupled with a secondary system for heating and cooling. For the secondary system I am using the heating and cooling type manager from Type 56. What I obtain is independtly from the air change rate imposed by the mechanical ventilation, the cooling and heating loads of the type manager remain the same. Are the heating and cooling type managers not adequate to simulate this or I am doing something wrong?

Thanks in advance!

Matias