|
Hello everybody, For my thesis in the field of solar process heating I need to work with TRNSYS but I am beginner :( I am going to design a solar system (attached file) without storage and heat exchanger: With wich standard components can I reach the below condition? - The outlet temperature of the collector field is controlled by adapting the mass flow in a range between 15% and the maximum of the mass flow. Below an irradiation of 200 W/m² the mass flow set to zero. The heat removal of the process is considered in a way that temperature is reset to Tset - 10 K. The delivered solar heat only contributes to the yield if the temperature raise at the process interface is more than 8 K. Otherwise the collector field runs in short circuit. Thanks regards Javid |