Re: [TRNSYS-users] type 109 with 5 minutes time step

[Dimas Firmanda Al Riza <dimasfirmanda@gmail.com>]

I have adjusted it by now, and it works! thanks a lot!

I adjust it like below

<interval> 0.08333   ! Data file time interval between consecutive lines

<firsttime> 0.08333       ! Time corresponding to first data line (hours)

-dimas-

On Mon, Oct 18, 2010 at 3:28 PM, hotline <hotline@transsolar.com> wrote:

Dimas,

 

did you also adjust the "Time corresponding to first data line" ?

 

<firsttime> 1          ! Time corresponding to first data line (hours)

In addition, you need to set the simulation time step to 5 minutes.

 

Marion

 

 

---

   Von: Dimas Firmanda Al Riza [mailto:dimasfirmanda@gmail.com]
Gesendet: Montag, 18. Oktober 2010 02:33
An: trnsys-users@cae.wisc.edu
Betreff: [TRNSYS-users] type 109 with 5 minutes time step

Dear all,

I have 5 minutes time step weather data, 

How to conduct simulation with 5 minutes time step using type 109, 

do I need to change something in the .109 data file?

I've try to just change the data in .109 file from 1 hour time step with my 5 minutes time step data

but when I run simulation with 5 minutes time step the results become weird,

Thank you very much

Regards,

Dimas Firmanda A.

MSc student

Mechanical Engineering Department

Universiti Teknologi PETRONAS