Dear
TRNSYS – Community,
I have a question about simulating a façade system with
shading
elements.
I need to simulate an office room with a double skin
façade (not
ventilated) with an interior shading system.
The shading system has a very complex geometry, so which
inputs
would be needed to model the shading system, and how does TRNSYS deal
with the
mass of the blinds, heating up the space between the glass panes.
Thanks for your help,
FLORIAN STIFT, DI(FH)
Energy Department
Sustainable Building Technologies
AIT Austrian Institute of Technology
Österreichisches
Forschungs-
und Prüfzentrum Arsenal Ges.m.b.H.
Giefinggasse 2 | 1210 Vienna | Austria
T +43(0) 50550-6277 | M +43(0) 664 815 79 46 | F +43(0)
50550-6613
florian.stift@ait.ac.at
|
http://www.ait.ac.at
FN: 165088b HG Wien | UID: ATU46577208 This email and any
attachments thereto, is intended only for use by the addressee(s) named
herein
and may contain legally privileged and/or confidential information. If
you are
not the intended recipient, please notify the sender by return e-mail
or by
telephone and delete this message from your system and any printout
thereof.
Any unauthorized use, reproduction, or dissemination of this message is
strictly prohibited. Please note that e-mails are susceptible to
change.
Österreichisches Forschungs- und Prüfzentrum Arsenal Ges.m.b.H. shall
not be
liable for the improper or incomplete transmission of the information
contained
in this communication, nor shall it be liable for any delay in its
receipt.