Dear Marcello,
the window in the TESS lib isn't defined
correctly.
I'm not sure if TESS released a corrected version of the
Library.
Maenwhile you can use the vitual window of the AMERICAN or
GERMAN Library.
they should worl without a problem.
Marion Hiller
Dipl.-Ing.
Marion Hiller
TRANSSOLAR
Energietechnik GmbH
Munich - New York - Stuttgart + 49.711.67976.0
KlimaEngineering-
Technologien für energieeffizientes Bauen und Nutzerkomfort in Gebäuden
Transsolar
Energietechnik GmbH, Curiestrasse 2, 70563 Stuttgart / Amtsgericht Stuttgart -
HRB 23347 / USt-IdNr.: 99073/00911
Geschäftsführer:
Dipl.Ing. Matthias Schuler, Dipl.Ing. Thomas Auer, Dipl.Phys. Stefan Holst
Dear TRNSYS users,
I am trying to model a zone with an opened window
in TRNSYS 16. For the thermal model, I use the type56 with a window of the type:
"Virtual (open or nonexistent) Window" (WINID 1) from TESS Library.
Unfortunately, when I start the simulation, I get the following error:
"Une valeur négative ou supérieure à 1 a été trouvé pour l'absorption
non visuelle W4_front pour la fenêtre no 1 : abs_nonvis = -.0008717874 à l'angle
= 0"
(A value negative or greater than 1 was found for nonvisual absorption
W4_front for Window-ID 1 : abs_nonvis = -.0008717874 at angle = 0)
I see that other people reported this problem in this forum, but I have
not found any solution.
Do you know how to solve this issue?
Thanks in advance for your attention.
Best regards,
Marcello CACIOLO
--
--------------------------------------------------------------------------------
Marcello CACIOLO
Ingénieur de Recherche Centre Energétique et
Procédés - Mines ParisTech
60, Bd Saint-Michel 75272 Paris Cedex 06
France
Tél : +33 (0)1 40 51 94 21 Fax : +33 (0)1 40 51 94 49
E-mail: marcello.caciolo@ensmp.fr
--------------------------------------------------------------------------------
|