Dear Heike, You have to put 9 instead of 7 as
performance figure values… as my shy colleague said. Good Luck Francesco From: Heike Huber-Fauland
[mailto:heike.huber-fauland@tuwien.ac.at] Dear all, I work with type668 water-water heat pump. I create a new heating performance file, with producer
datas, in the same format/layout like the example. The number of temperatures (source/ load) in
parameters is set to the numbers in the file, but it don´t work. ( I only need the heating mode) Generated by Type : 668 TRNSYS Message 109 : Error reading data
stored in logical unit. NOTE: the reported logical unit number may be automatically
or internally ASSIGNed, or you may have specified the incorrect number of
independent variables. For me it seems filled out correct and I don´t find the
problem. Any idea? Thanks in advance Heike Dipl-Ing.
Heike Huber-Fauland Technische
Universität Wien Institut
für Energietechnik und Thermodynamik Getreidemarkt
9/302 1060
Wien Tel:
(+43-1) 58801-30217 Fax:
(+43-1) 58801-30299 Email: heike.huber-fauland@tuwien.ac.at WWW:
http://www.ite.tuwien.ac.at |