|
Hi everyone, just if someone
encounters the same problem. I don’t know why, but trnsys (maybe when
some special types are used) in my case acts like this. You can use TRNEDIT to avoid
this problem. Here you can call the input file of your project and simulate multiple
time periods. If your desired period is not included, go to trnsys/exe and edit
the file length.dat. Here you can add your desired time period. Marius Von: Marius Müller Hi Leen, did not work. L But I analysed the
Problem! The simulation could only run for fixed time periods! These are one
day, one week, two weeks, one month, two month, one year! Means one day, 7 days, 14
days, 28 days, 56 days, 365 days. The 1344 hours are the 56 days. When I put
two days, 8 days, i.e., the simulation uses the next smaller time period, one
day or 7 days, i.e. Is it possible, that my
model causes this? Or is this a problem of trnsys? Marius Von: leen peeters
[mailto:l.f.r.peeters@gmail.com] Hi Marius, try to put everything in hours, express your minutes as hours as
well> SO start at 1 (not at 0) and stop at e.g. 4000 with steps of
0.05 h (around 5 minutes) Leen 2010/6/8 Marius Müller <m.mueller@solitem.de> Hello Leen, thanks for your answer. I selected 1 min as timestep, but with different timesteps i.e. 10
min or 0,1 min, the results are the same. For start and stop I tried with hours, i.e. 1 to
2000 and days, i.e. 1 to 30 but the results stay the same. Marius Von: leen peeters [mailto:l.f.r.peeters@gmail.com] Marius, can you give more details
on the simulation timestep and what you selected for that in the control cards?
As well as for start and stop (string, seconds, hours,...) Leen 2010/6/7 Marius
Müller <m.mueller@solitem.de> Hello
everyone, I
have a problem with the simulation time in trnsys. When I want to simulate for
half a year or so, the simulation only runs for 1368 hours. When I want
simulate for 1368 hours it runs for 1344 hours. A similar error has already
appeared in the archives, but complete answer was given: https://www-old.cae.wisc.edu/pipermail/trnsys-users/2008/003440.html Maybe
someone can help. Thanks
a lot, Marius
|