Guy,
I haven't run into the problem of the Studio shutting down when you
try to open the list file. However, that list file is just a text
document located in the same place that Studio wrote your input file. I
would recommend that you open the lst file (or the *.log file - it
contains much the same information) with a text editor (bloc notes for
example) and look for the error text.
Best,
David
On 5/14/2010 04:25, Guy THOMAS wrote:
Hi
everybody,
I have a problem on trnsys simulation studio. I'm controlling various
zone of a building and until now i had no problem to see on the online
plotter the temperature and the flow rate going on the zones. But now,
I've just added one more controlling system for an other zone of the
building by doing a copy/paste as I have done for all the others zones
of the building until now. Then, I connect the temperature of the zone
to the plotter and it run the simulation OK. But, when I add the links
between the pid and the plotter to see the flowrate (as I have done for
all the others zones by replacing the links on the plotter with the new
zone added) and I try to run the simulation I have this message error:
"One error was found in the deck chek the listing file for more
information" so I try to open the listing file but instead it close my
simulation studio file.
Does anybody know the reason of this problem?
Kind regards
Guy THOMAS
CNAM student
Envie de plus d'originalité dans vos conversations ? Téléchargez gratuitement les Emoch'ticones !
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@cae.wisc.edu
https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
--
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
Madison, WI 53703 USA
P:+1.608.274.2577
F:+1.608.278.1475
bradley@tess-inc.com
http://www.tess-inc.com
http://www.trnsys.com
|