|
Dear all, As a new user, I need to know how to control
the zone temperature of a multizone bulding (type56) using a type23 PID controller.
I defined an input heating power in trnbuild which would be the output of type
23 (control signal). The heating setpoint is fixed to 20 °C. The result was not
satisfactory, as the temperature remains lower than the setpoit and does not
oscillate. Thank you Salim MOKRAOUI Faculté des sciences de Nancy - LERMAB BP 239 54506 Vandoeuvre. Tél 03 83 68 48 47 - mél salim.mokraoui@lermab.uhp-nancy.fr |