[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[TRNSYS-users] air to water heat pump

Hello all,
 
I´m searching for a Trnsys Type to model an exhaust-air to water heat pump. So it needs to take condensation effects into account!
I have found a very interesting description about a model developed by the German Fraunhofer Institute, (presented in 2001 at the Trnsys-Userday) but I cant find the Type itself.
 
I hope someone knows a good type, and where to get it.
 
regards,
 
Sarah
 
Mit freundlichem Gruß,
 
Sarah Settler
 
Ökoplan
Büro für zeitgemäße Energieanwendung
Hummelsbütteler Weg 36
22339 Hamburg
T 040 5394143 F 040 5394144
 

From: knut.erik.enerstvedt@niva.no [mailto:knut.erik.enerstvedt@niva.no]
Sent: Monday, March 22, 2010 9:20 AM
To: fbetz@aeieng.com
Cc: trnsys-users@cae.wisc.edu
Subject: Re: [TRNSYS-users] Importing Window 6.2 data into building library


Fred,

Have a look at this tutorial: http://sel.me.wisc.edu/trnsys/downloads/tutorials_and_examples/window5/window5.htm. It explains how to add new windows to the TRNSYS library.

Best regards,
Knut Erik


>TRNSYS,
 
>I just want to verify I am doing this correctly before I damage the TRNSYS libraries.
 
>I have a doe2 data file from Window6.2 as a text file. I am assuming version 6.2 is ok as the format looks the same as version 4.1.
 
>Should I copy and paste that text at the end of W4-lib.dat file in \Trnsys17\Building\Lib\Basic?
 
>It looks like the library is just a series of Window 4.1 doe2 text.
 
>I just can?t find anywhere in the documentation that explicitly states what I am supposed to do. There is mention on page 5-73 >that I should reference the main TRNSYS reference manual. As far as I can tell there is no reference of Window 4.1 outside >05-MultizoneBuilding.pdf
 
>Please advise,
 
>Fred
------------------------------------------------------------------------------------------------------------
Meld deg på vårt nyhetsbrev på www.niva.no