|
Hello Ivan and David, I saw your message Ivan and i will have to do exactly the same project than your system but the auxiliary source will be a gaz boiler in my case. It's for my ingenior thesis. Actually, I give the inputs to make my building in TRNBuild. But I have done some tries on Simulation Studio with a smaller building connecting the type 56 with a combined solar system and until now i couldn't succeed to run the system i have an error message with a problem on the number of inputs in the solar system. I'm actually looking for where is the problem, maybe it's not possible to operate type 56 with a solar thermal collector because of the number of outputs of weather data type? I will inform you if i find a solution. Or maybe you will find the solution before me so could you inform me of the solution in this case. Best regards --Pièce jointe du message transmise-- From: ivan.tombolato@gmail.com To: trnsys-users@cae.wisc.edu Date: Tue, 16 Mar 2010 11:48:39 +0100 Subject: [TRNSYS-users] Combined solar system Dear Trnsys users I'm trying to simulate a combined solar system for domestic hot water and for heating. The auxiliary source is a wood boiler. There is some specific type to simulate the wood boiler? I would like to connect this power system to TRNBUILD file, to analyse if it's acceptable for building heating and domestic hot water needs. For domestic hot water needs i'm trying to add some DHW profiles (with 1 hour simulation step). How do i get to import a DHW profile matrix with 1 hour step DHW loads? Thanks. Ivan Commander un cadeau en ligne discrètement? Voir la solution offerte par Internet Explorer8 |