[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [TRNSYS-users] How do you delete an active layer in Type56
I've now recreated my building; replacing the active-floor with a non-active variant.
The Max. heat load calculation runs OK but the output could do with more explaination as this is not covered in 06-MultizoneBuilding.pdf. Specifically:
1) How do I interpret the simulation plot. I've worked out that P-Z1, P-Z2 etc are the powers supplied to the zones despite the axis being labled "Temperature". "Pges" appears to be the sum of the zones heat draw in kW although don't know what "ges" stands for.
2) I've failed to find any max load summary in any of the generated files. Plenty of numbers but no key.
3) Why is the simulation set to a period of 744 hours ( 31 days )
In general, a bit more explanation in this area would be helpful.
Kind Regards
Paul
--- On Sun, 27/12/09, PAUL COALES <coalespr@btinternet.com> wrote:
> From: PAUL COALES <coalespr@btinternet.com>
> Subject: How do you delete an active layer in Type56
> To: trnsys-users@cae.wisc.edu
> Date: Sunday, 27 December, 2009, 22:13
> How do you delete a Wall cointaining
> an Active Layer from a Zone? The Delete button for the
> Active Wall is disabled when ever I select it. What is
> the reason for this?
>
> I need to replace the said wall with a non-active variant
> so that I may perform a Max heat Load Calculation.
>
> Kind Regards
> Paul
>