|
Dear Users: I`m trying to model an air conditioning system using ground cooling, specific with heat pump. In this systems there are 3 parts, the generation using a heat power, the second part is the acumulation system with tank, and finally the distribution system using 4 valves. Now, I managed to model this system with TRNSYS, but I have a doubt, because I got the same results using different input values. For example, when I try to compile this file, using the same values but inlet temperature other value (input 33 type 56) , I get the same results, but I think I should get other results. I think one reason about this problem is that I haven´t found the best connection between the outlet fluid (type termost-retorno-2) and the (type 56 vivienda), because only the temperature is conected. I managed to conected using other way, for example 1 valve with 3 inputs (3 zones of the house: first floor, second floor and atic) and the outlet that is conected with (type 11g-2). I attached 4 files, the squematic of the system air aconditioning, the TRNSYS file, the trnbuild, the matlab file. Please, any comment? Thanks.. ¡Windows Phone ya está aquí! Mucho más que un teléfono. ¡Hazte con uno! |
Attachment:
suelo refrigerante.jpg
Description: image/pjpeg
Attachment:
Project25.tpf
Description: Binary data
Attachment:
CASA_INICIO.bui
Description: Binary data
Attachment:
TyCaudal_HC.m
Description: Binary data
Attachment:
valladolid.met
Description: Binary data