Re: [TRNSYS-users] TRNSYS error: Type called in input file, but not linked or found in external dll

[knut.erik.enerstvedt@niva.no]

Dear Jeff and Matt,

Thank you both for helping me with this
problem.

I had missed the DLLExport line because
my compiler printed it in green like all the comments. Now everything is
working fine.

Best regards,
Knut Erik

From:	"Jeff Thornton" <thornton@tess-inc.com>
To:	knut.erik.enerstvedt@niva.no, trnsys-users@engr.wisc.edu
Date:	09.12.2009 18:43
Subject:	Re: [TRNSYS-users] TRNSYS error: Type called in input file,     but not linked or found in external dll

---

<The List file also says that "Type240.dll
(my new Type) was found but did not contain any components from the input
file". I can not understand how both these messages can appear at
the same time.>

Make sure the subroutine line of your new code (usually the first line)
has your new type number listed:

Subroutine Type240(

and that the DLLExport line also has the 240 designation:

!DEC$ATTRIBUTES DLLEXPORT :: TYPE240

That's usually the source of the error.

Jeff


Jeff Thornton
President - TESS, LLC

22 North Carroll Street - Suite 370
Madison WI 53703 USA

Phone: 608-274-2577
Fax: 608-278-1475
E-mail: thornton@tess-inc.com
Web: www.tess-inc.com




------------------------------------------------------------------------------------------------------------
Meld deg på vårt nyhetsbrev på www.niva.no