Dear Laia
You can use an equation tool with schedule made with combinations of LT and GT to obtain
value month per month before
type 24.
For example :
Output1*LT(TIME,744) => if you integrate this value with type 24,
you will obtain an integration of output1 for January
Output1*AND(GE(TIME,744),LT(TIME,1416)) => February
... etc for other months
If you add all of this mensual value, you will obtain annual
integration.
Otherwise, you can make calculation with EXCEL after simulation run.
Best regards
www.itf.biz
|
Adrien
JEZEQUEL
Simulations Thermiques Dynamiques |
ITF
|
87, Avenue de
Chambéry
73230 St Alban Leysse
FRANCE
|
Phone :
Fax :
Mail:
|
+33(0) 479 750
029
+33(0) 479 852 122
a.jezequel@itf.biz |
Afin de contribuer au
respect de l'environnement, merci de n'imprimer cet e-mail que si
nécessaire
Please, consider our
environmental responsability before printing this email
Laia Cases - iMat a écrit :
Hi,
from the results of type56, i am trying to get the value for month with
integrator (with integration period with -1), then using this values to
make some check with equation, and later on using a new integrator to
get anual values (with integration period STOP, also printing interval
STOP...) . but it seems that 2 integrations followed don't really work.
It seems it has no sense.
Thanks in advance
Laia
--
|
Laia
Cases
Unitat de Condicionament Tèrmic
iMat - Centre Tecnològic de la Construcció
lcases@imat.cat
www.imat.cat
|
|
Wellington
23 · E-08018 Barcelona
T +34 93 553 97 95
F +34 93 553 97 96
Imprimiu aquest document només si és necessari |
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@cae.wisc.edu
https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
|