Re: [TRNSYS-users] Type15-2: Output parameters for different surfaces

[David Bradley <bradley@tess-inc.com>]

Paul,
 The first place to look is under the "More" button. If that doesn't give you enough direction, the Volume 05 Mathematical descriptions manual is the main reference. Type15, however, is glued together from a few other older components and I think that the 05 Mathematical Description manual will direct you to look at the Type16 documentation for information about the definition of those outputs. the outputs are generated automatically based on the surfaces that you define among the Type15 parameters. There is one parameter to tell how many surfaces you want and then there are three parameters per surface: one for the tracking mode, one for the slope, and one for the azimuth.
Regards,
 David

PAUL COALES wrote:

In the SunSpace example, Type15-2  has radiation output parameters defined for different surfaces:

Ground reflected diffuse radiation for surface-1
Ground reflected diffuse radiation for surface-2
Sky diffuse radiation for surface-1
Sky diffuse radiation for surface-2
etc

Where are these outputs setup?  Where in the documentation is this described.

Paul

_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@cae.wisc.edu
https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
  

-- 
***********************************************************************
Thermal Energy System Specialists (TESS), LLC 
David BRADLEY                      22 N. Carroll Street - Suite 370 
Partner                            Madison, WI 53703 
                                   USA
P: +1.608.274.2577 
F: +1.608.278.1475
E-mail: bradley@tess-inc.com 
Web Pages:  http://www.tess-inc.com    and      http://www.trnsys.com

***********************************************************************