[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[TRNSYS-users] type 15-3 epw weather data



 

Dear all,

I wont to use the type 15-3 weather data reader because I have a EPW weather file. The problem is that Trnsys gives me the followings errors:

 

 

And

 

            TRNSYS - the TRaNsient SYstem Simulation program

 

   The Solar Energy Lab at the University of Wisconsin - Madison, USA

Le Centre Scientifique et Technique du Batiment, Sophia Antipolis, France

           Transsolar Energietechnik GmBH, Stuttgart, Germany

        Thermal Energy System Specialists, Madison Wisconsin, USA

 

                           Release 16.01.0002

 

Listing file for: "C:\Programmi\Trnsys16\MyProjects\Project44\Project44.dck"

 

*** Notice at time        :         0.000000

    Generated by Unit     : Not applicable or not available

    Generated by Type     : Not applicable or not available

    Message               : The TRNSYS Executable (TRNExe.exe) and main DLL (TRNDll.dll) are located in "C:\Programmi\Trnsys16\Exe"

 

 

 *** Pre-Processing the TRNSYS EQUATIONs and CONSTANTs to check for fatal errors.

 

 *** Pre-Processing of EQUATIONs and CONSTANTs completed with no fatal errors found.

 

 *** Evaluating the EQUATIONs and CONSTANTs to determine their initial values.

 

 *** Finished evaluating the EQUATIONs and CONSTANTs and ready to begin processing the remainder of the TRNSYS input file.

 

  VERSION        16

*******************************************************************************                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         

*** TRNSYS input file (deck) generated by TrnsysStudio                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  

*** on martedì, settembre 15, 2009 at 15:53                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                             

*** from TrnsysStudio project: C:\Programmi\Trnsys16\MyProjects\Project44\Project44.tpf                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                 

***                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                     

*** If you edit this file, use the File/Import TRNSYS Input File function in                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            

*** TrnsysStudio to update the project.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                 

***                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                     

*** If you have problems, questions or suggestions please contact your local                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            

*** TRNSYS distributor or mailto:software@cstb.fr                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

***                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                     

*******************************************************************************                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         

*******************************************************************************                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         

*** Units                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

*******************************************************************************                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         

*******************************************************************************                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         

*** Control cards                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

*******************************************************************************                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         

* START, STOP and STEP                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  

 

  CONSTANTS   3

     START=0

     STOP=8760

     STEP=1

* User defined CONSTANTS                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                

! Start time        End time           Time step                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          

 

  SIMULATION         0.0000000000000000E+00    8.7600000000000000E+03    1.0000000000000000E+00

! Integration       Convergence                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                     

 

  TOLERANCES         1.0000000000000002E-03    1.0000000000000002E-03

! Max iterations Max warnings    Trace limit                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            

 

  LIMITS        30        30        31

! TRNSYS numerical integration solver method                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  

 

  DFQ   1

! TRNSYS output file width, number of characters                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            

 

  WIDTH    80

! NOLIST statement                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            

 

  LIST

! MAP statement                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    

! Solver statement         Minimum relaxation factor          Maximum relaxation factor                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  

 

  SOLVER  0

    1.000000000000000   

    1.000000000000000   

! Nan DEBUG statement                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    

 

  NAN_CHECK   0

! Overwrite DEBUG statement                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         

 

  OVERWRITE_CHECK   0

! disable time report                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

 

  TIME_REPORT   0

! EQUATION SOLVER statement                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

 

  EQUATION SOLVING METHOD         0

* Model "Type15-3" (Type 15)                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            

*                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

 

  UNIT   2     TYPE  15     Type15-3                                      

*$UNIT_NAME Type15-3                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    

*$MODEL .\Weather Data Reading and Processing\Standard Format\Energy+ Weather Files (EPW)\Type15-3.tmf                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  

*$POSITION 366 200                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      

*$LAYER Main #                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          

       PARAMETERS   9

! 1 File Type                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        

! 2 Logical unit                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    

! 3 Tilted Surface Radiation Mode                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    

! 4 Ground reflectance - no snow                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

! 5 Ground reflectance - snow cover                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                

! 6 Number of surfaces                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

! 7 Tracking mode                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    

! 8 Slope of surface                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

! 9 Azimuth of surface                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

       3.0000000000000000E+00    3.0000000000000000E+01    4.0000000000000000E+00    2.0000000000000001E-01    7.0000000000000007E-01

       1.0000000000000000E+00    1.0000000000000000E+00    0.0000000000000000E+00    0.0000000000000000E+00

*** External files                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      

  ASSIGN C:\Documents and Settings\Nicola\Documenti\TESI PhD NIK\TRNSYS16\Perugia UNI10349.epw   30

*|? Which file contains the Energy+ weather data? |1000                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                 

*------------------------------------------------------------------------------                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         

 

  END

 

 

         TRANSIENT SIMULATION     STARTING AT TIME =  0.0000000000000000E+00

                                  STOPPING AT TIME =  8.7600000000000000E+03

                                          TIMESTEP =         1 /        1

             DIFFERENTIAL EQUATION ERROR TOLERANCE =  1.0000000000000002E-03

                   ALGEBRAIC CONVERGENCE TOLERANCE =  1.0000000000000002E-03

 

     DIFFERENTIAL EQUATIONS SOLVED BY MODIFIED EULER  

 

*** Notice at time        :         0.000000

    Generated by Unit     : Not applicable or not available

    Generated by Type     : Not applicable or not available

    Message               : The following Types were loaded from TRNDll.dll: Type15

 

 

*** Notice at time        :         0.000000

    Generated by Unit     : Not applicable or not available

    Generated by Type     : Not applicable or not available

    Message               : "TESSApplicationsLibrary_ReleaseVersion202.dll" was found but did not contain any components from the input file.

 

 

*** Notice at time        :         0.000000

    Generated by Unit     : Not applicable or not available

    Generated by Type     : Not applicable or not available

    Message               : "TESSControlsLibrary_ReleaseVersion202.dll" was found but did not contain any components from the input file.

 

 

*** Notice at time        :         0.000000

    Generated by Unit     : Not applicable or not available

    Generated by Type     : Not applicable or not available

    Message               : "TESSGHPLibrary_ReleaseVersion202.dll" was found but did not contain any components from the input file.

 

 

*** Notice at time        :         0.000000

    Generated by Unit     : Not applicable or not available

    Generated by Type     : Not applicable or not available

    Message               : "TESSGreenBuildingLibrary_ReleaseVersion202.dll" was found but did not contain any components from the input file.

 

 

*** Notice at time        :         0.000000

    Generated by Unit     : Not applicable or not available

    Generated by Type     : Not applicable or not available

    Message               : "TESSHVACLibrary_ReleaseVersion202.dll" was found but did not contain any components from the input file.

 

 

*** Notice at time        :         0.000000

    Generated by Unit     : Not applicable or not available

    Generated by Type     : Not applicable or not available

    Message               : "TESSSolarLibrary_ReleaseVersion202.dll" was found but did not contain any components from the input file.

 

 

*** Notice at time        :         0.000000

    Generated by Unit     : Not applicable or not available

    Generated by Type     : Not applicable or not available

    Message               : "TESSStorageLibrary_ReleaseVersion202.dll" was found but did not contain any components from the input file.

 

 

*** Notice at time        :         0.000000

    Generated by Unit     : Not applicable or not available

    Generated by Type     : Not applicable or not available

    Message               : "TESSUtilityLibrary_ReleaseVersion202.dll" was found but did not contain any components from the input file.

 

 

*** Notice at time        :         0.000000

    Generated by Unit     : Not applicable or not available

    Generated by Type     : Not applicable or not available

    Message               : "Type157_demo_release.dll" was found but did not contain any components from the input file.

 

 

*** Notice at time        :         0.000000

    Generated by Unit     : Not applicable or not available

    Generated by Type     : Not applicable or not available

    TRNSYS Message    199 : TRNSYS found at least one user DLL in the UserLib directory. (Note: Only DLL's including Types that are used in the simulation are loaded)

    Reported information  : 0 user DLLs were loaded after searching in "C:\Programmi\Trnsys16\UserLib\ReleaseDLLs"

 

 

Wath’s it wrong?

Regards

Nicola

                    Dott. Ing. Nicola Sorbi

             

          UNIVERSITA' DEGLI STUDI DI PERUGIA

           Dipartimento di Ingegneria Industriale

           Via G. Duranti 1A/4 - 06125 Perugia

           Tel. +39 075/5853930 - Fax. +39 075/5853736

           E-mail nicolasorbi@mach.ing.unipg.it