[TRNSYS-users] Tr : problem of fichier air in the Calling Contam Exemple

Freindly users,
I want to contiue my question.
The type Contam make me worried because a new model created in Contam by myself give the same result. The outputs showed by the type Contam in simulation studio didn't correspond to those outputs's ordre in the file "air": 1->2, 1->3.
Has someone found a solution?
Aleck

----- Message transféré ----
De : Yujun TAO <aleck1314@yahoo.fr>
À : TRNSYS USERS <trnsys-users@engr.wisc.edu>
Envoyé le : Vendredi, 4 Septembre 2009, 16h52mn 15s
Objet : [TRNSYS-users] problem of fichier air in the Calling Contam Exemple

Hello,
I found an ambiguous explanation by Contam for the fichier air in the Calling Contam Exemple.

Here is the meaning about Output in Contam :
One line for each output variable consisting of
I NR      - output number (index to XOUT).
I NZ      - number of zone the air flows from.
I MZ      - number of zone the air flows to.

Here is the Exemple about Output in the fichier air in the Calling Contam Exemple :
-999 inputs & outputs:
6 6
1 1 2
2 1 3
3 2 1
4 2 3
5 3 1
6 3 2
-999 end-of-data
...
       ********** AVAILABLE OUTPUTS **********

         1     Flow from zone Foyer/GroundFloor to zone MainZone/GroundFloor
         2     Flow from zone Ambient to zone MainZone/GroundFloor
         3     Flow from zone MainZone/GroundFloor to zone Foyer/GroundFloor
         4     Flow from zone Ambient to zone Foyer/GroundFloor
         5     Flow from zone MainZone/GroundFloor to zone Ambient
         6     Flow from zone Foyer/GroundFloor to zone Ambient

If we look at Output 1 and 2, the number of zone the air flows from is the same "1", but in the description "available outputs", the name is different, Output 1 = flow from foyer to mainzone well Output 2 = flow from ambient to mainzone.

So, where is the problem? just the description or the model Contam?

Aleck
Engineer