[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [TRNSYS-users] Question thermostat type 698
Dear Senne,
I just ran a simulation with Type698, and it worked correctly. I would
assume that you have to mess with the temperature dead band or the other
parameters. You could simply set your setpoint to 17 C with 2 C deg
deadband. Please see attached project.
Best regards,
Matt Duffy
----- Original Message -----
From: "senne plessers" <senne_plessers@hotmail.com>
Sent: Mon, August 31, 2009 4:29
Subject:[TRNSYS-users] Question thermostat type 698
Dear trnsys users,
I have a little problem with thermostat type 698.
I want to control the temperature with the thermostat,
but it doesn't seem to work. The temperatures for heating are
set between 16 and 18°C and for cooling between 24 and 26°C.
If I run the simulation my temperatures are oscillating in a bigger
interval than is should be.
Can someone help me?
Thanks in advance,
Kind regards,
Senne
_________________________________________________________________
Voeg vrienden toe van LinkedIn &amp; Facebook aan je Windows Live
http://profile.live.com/connect
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@cae.wisc.edu
https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
----- End of original message -----
----- End of original message -----