[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [TRNSYS-users] type111
Igor,
I don't think that there is a problem with the Type111 fan itself; I
just ran some simple simulations with a fan that puts out 500 000 kg/h
and it was fine. My guess is that the high air flow rate from the fan is
causing another problem down stream of the fan.
Kind regards,
David
Igor Frey wrote:
Hello everyone,
I'm using the type 111 fan, using it for quite high flow rates (100 000
kg/h)
My problem is that when I set values higher than 50 000 kg/h, the output
flow rate of the fan is 0.
If I set values between 5000 and 50 000, the simulation stops in the
first hours and I receive an error message : "the program is not
answering anymore"
Only values under 5000 are working...
Does anyone see where is the problem ?
Thanks a lot
Igor
--
***********************************************************************
Thermal Energy System Specialists (TESS), LLC
David BRADLEY 22 N. Carroll Street - Suite 370
Partner Madison, WI 53703
USA
P: +1.608.274.2577
F: +1.608.278.1475
E-mail: bradley@tess-inc.com
Web Pages: http://www.tess-inc.com and http://www.trnsys.com
***********************************************************************