Matteo,
Without seeing the project, it is difficult to know what the problem
might be. Try adding a "trace" onto Type60 to see if you can determine
which input/output connection is not converging.
Kind regards,
David
Matteo DF wrote:
Hi,
I'm having a little problem with type 60. I need a water storage tank
which can receive heat from 2 sources: a solar collector and a
borehole heat exchanger. The water heated by these two sources will be
used by a reversible HP...
I've placed type60 in my model and I set it to have two heat
exchangers, one for the solar collectors and the other one for the
borehole... In fact the flow coming from the solar collectors has to
return directy to them and so the water coming from the borehole.
The tank has one inlet and one outlet, they will be used to supply
water to the HP.
Anyway I'm getting an error of convergence and the model won't execute.
Where I'm wrong?
Thanks!
Matteo
--
La scoperta è vedere ciò che tutti hanno sempre visto e
pensare ciò che nessuno ha mai pensato.
(Albert Szent-Gyorgyi, scopritore della vitamina C e premio Nobel)
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@cae.wisc.edu
https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
--
***********************************************************************
Thermal Energy System Specialists (TESS), LLC
David BRADLEY 22 N. Carroll Street - Suite 370
Partner Madison, WI 53703
USA
P: +1.608.274.2577
F: +1.608.278.1475
E-mail: bradley@tess-inc.com
Web Pages: http://www.tess-inc.com and http://www.trnsys.com
***********************************************************************
|